I've seen it several times. Usually in the instructions there is mention of "multiple ipls" possible,
or if something required to be perm applied.
----- Original Message ----- From: "Steinmetz, Paul" <PSteinmetz@xxxxxxxxxx>
To: "'Midrange Systems Technical Discussion'" <midrange-l@xxxxxxxxxxxx>
Sent: Friday, May 09, 2014 4:06 PM
Subject: Issue when installing PTFs, set to be applied an next IPL

I never saw this before.
When doing option 8. Install program temporary fix package
Set all PTFs to delayed, applied at next IPL.

Continue PTF Install
System: PENCOR06
The previous PTF install was incomplete because of processing needed to
install a technology refresh PTF. In the previous PTF install, no PTFs
were applied and at least one PTF could not be loaded because a
technology refresh PTF was not permanently applied. The previous IPL
has permanently applied the technology refresh PTF and the PTF install
can now be continued.

Press Enter to load the remaining PTFs from the install device and apply
all loaded PTFs. When installing from a tape or optical device, mount
the first volume in the PTF volume set.

Press F12 to cancel the installation.

Thank You
Paul Steinmetz
IBM i Systems Administrator

Pencor Services, Inc.
462 Delaware Ave
Palmerton Pa 18071

610-826-9117 work
610-826-9188 fax
610-349-0913 cell
610-377-6012 home


This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.

This thread ...


Return to Archive home page | Return to MIDRANGE.COM home page