Thank you very much. That was most helpful.

I created the hscpe user (it did not exist on my HMC), and was able to view the log. (googling on this user ID, which I never heard of before, I also found out
that only the hscpe user is permitted to see the log even when using the terminal directly. No wonder it kept blocking me when signed on with hscroot (which I thought could do everything on the HMC).
Apparently not.

You are correct that the entries are not very informative and, when dug into, tell me the same thing the original message said: an internal error in licensed code.

Thanks again.

Pressing on,

Thomas Garvey

On 4/1/2014 7:37 AM, Robert Clay wrote:
On 03/31/2014 1:01 PM, Thomas Garvey wrote:

Seems there should be a way to see the HMC log by using the HMC web
access program.


You have to be logged in as user hscpe.

Then, Service Management-->View HMC Logs.

The entries aren't very informative on the resulting screen (in my
estimation) but you can click on each timestamp and view expanded
information for that entry.

"Contrariwise, if it was so, it might be; and if it were so, it would
be; but as it isn't, it ain't. That's logic."--Tweedledee

This thread ...


Return to Archive home page | Return to MIDRANGE.COM home page