MIDRANGE dot COM Mailing List Archive



Home » MIDRANGE-L » March 2014

Re: MCH3601 - Pointer not set for location referenced



fixed

Hi Paul,

Does the program abend or are you just seeing this message in the joblog?
If it's the latter then you probably don't need to worry about it.
I've found some joblog messages in 3rd party software which they must be monitoring for because the programs keep working.

Cheers,

Glenn Gundermann

-----Original Message-----
From: "Steinmetz, Paul" <PSteinmetz@xxxxxxxxxx>
Sender: midrange-l-bounces@xxxxxxxxxxxx
Date: Sun, 16 Mar 2014 14:17:46
To: 'Midrange Systems Technical Discussion'<midrange-l@xxxxxxxxxxxx>
Reply-To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Subject: MCH3601 - Pointer not set for location referenced

Periodically, our one 3rd party application results in a MCH3601 Pointer not set for location referenced. A pointer was used, either directly or as a basing
pointer, that has not been set to an address.

What could be the cause of the MCH3601?
What can be captured to resolve the issue?

MCH3601 Escape 40 03/16/14 08:36:45.622618 APIPROC ICGTWYP1OC *STMT APIPROC ICGTWYP1OC *STMT
From user . . . . . . . . . : WSCUSER
From module . . . . . . . . : APIPROC2
From procedure . . . . . . : DoProcess
Statement . . . . . . . . . : 59
To module . . . . . . . . . : APIPROC2
To procedure . . . . . . . : DoProcess
Statement . . . . . . . . . : 59
Message . . . . : Pointer not set for location referenced.
Cause . . . . . : A pointer was used, either directly or as a basing
pointer, that has not been set to an address.
CEE9901 Escape 30 03/16/14 08:36:45.623605 QLEAWI QSYS *STMT APISTART ICGTWYP1O 00BD
From user . . . . . . . . . : WSCUSER
From module . . . . . . . . : QLEDEH
From procedure . . . . . . : Q LE leDefaultEh
Statement . . . . . . . . . : 204
Message . . . . : Application error. MCH3601 unmonitored by APIPROC at
statement 0000000059, instruction X'0000'.
Cause . . . . . : The application ended abnormally because an exception
occurred and was not handled. The name of the program to which the
unhandled exception is sent is APIPROC APIPROC2 DoProcess. The program was
stopped at the high-level language statement number(s) 0000000059 at the
time the message was sent. If more than one statement number is shown, the
program is an optimized ILE program. Optimization does not allow a single
statement number to be determined. If *N is shown as a value, it means the
real value was not available. Recovery . . . : See the low level messages
previously listed to locate the cause of the exception. Correct any errors,
and then try the request again.

Thank You
_____
Paul Steinmetz
IBM i Systems Administrator

Pencor Services, Inc.
462 Delaware Ave
Palmerton Pa 18071

610-826-9117 work
610-826-9188 fax
610-349-0913 cell
610-377-6012 home

psteinmetz@xxxxxxxxxx
http://www.pencor.com/







Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2014 by MIDRANGE dot COM and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available here. If you have questions about this, please contact