|
Update on problem-- took a gamble--set AS/400 panel to 01 B M (I assume manual)and hit poweroff key--it worked. Did a manual IPL,--got a picture on terminal-reset password to QSECOFR etc via DST--got login--loged in ok--IPL finished and panel shows 01 B after many system prompts-back to 1/2 system status light--no menu nothing. Im starting to suspect maybe some important system files were wiped accidently by last owner during clean up before handover ----strange but i saw this machine working a pwrdwn sys *imed etc before I picked up and moved. ---------- > From: DAVID BULOG <d2ba@xtra.co.nz> > To: MIDRANGE-L@midrange.com > Subject: Model 200 problem--how do I get out of trouble? > Date: Thursday, 6 May 1999 21:40 > > Hi all, > > I have just obtained my 9402-model 200--slight problem is that I have no > idea how to > get to manual mode and do a powerdown from the AS/400 panel. > how did I get myself in this sorry state. > > 1:attached good working 3197 terminal set at address 0(tested just before > on my trusty E20) into port0 of model 200--made sure of 01 B N(for normal) > on AS/400 panel and powered on--when terminal changed from 1/80 to 1/2 with > system status light bottom left hand corner; > I assumed all ok-since this is usual during a IPL--went away for 40 min. > Upon arrival noticed no signon screen-terminal still at 1/2 and system > status light on, > AS/400 panel shows normal 01 B so I assume must of IPLed OK. > Retested 3197 terminal on my E20-all OK and put back into model 200-no > change. > > Q1:Any clues as to what is going on? > > Q2:I need to go to manual mode and hit the powerdown button--no idea how to > get there--the model200 does not take a key like the E20-it has a uparrow > button,down arrow button and a enterkey? > > Q3:Aboubt 12months ago I found a usermanual for the model 200 on IBMs > site--cant remember how I got there--any clues? > > thanks in advance > > Dave B > > > > +--- > | This is the Midrange System Mailing List! > | To submit a new message, send your mail to MIDRANGE-L@midrange.com. > | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com. > | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com. > | Questions should be directed to the list owner/operator: david@midrange.com > +--- +--- | This is the Midrange System Mailing List! | To submit a new message, send your mail to MIDRANGE-L@midrange.com. | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com. | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com. | Questions should be directed to the list owner/operator: david@midrange.com +---
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.