Re: Installing WAS 8.5 Express Supplements

[Jim Oberholtzer <midrangel@xxxxxxxxxxxxxxxxx>]

Aaahhh I wish for the simplicity of an LPP and options, but alas, no 
they are not features in the sense that they show up on the display 
licensed program list.  Base WAS does yes, but not the supplemental 
products.

I am so glad Zend decided to use the Licensed Program and PTF route to 
load and update Zend Server.  It's so much easier than WAS.

Yes WAS uses a PTF, but then you have to update the installation 
manager, then run the script to apply all the changes to the server 
while it's down.  That can take "some minutes" as Larry likes to say.   
That process is nearly as awful as the original installation.  If you 
get an error which happens quite often, you have to be a Java Guru to 
figure out what went wrong and correct it.  Usually it's a misspelling 
of one of the options, or a missed dash or something like that, but it's 
a bit of a task to find it.

Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


On 1/30/2013 9:59 AM, Jack Kingsley wrote:
> Do you have more info than just supplemental products??  Would these be
> features of 5733W80 5733W85 then??
>
> On Wed, Jan 30, 2013 at 10:56 AM, Jim Oberholtzer<
> midrangel@xxxxxxxxxxxxxxxxx>  wrote:
>
> > >  Jack,
> > >
> > >  Yes that is the instruction sheet for the original install.  I'll argue,
> > >  now from experience, that they leave quite a bit out but it works for
> > >  the base installation.  What I'm after is the instructions on how to do
> > >  the supplemental products that are on the second DVD.
> > >
> > >  Jim Oberholtzer
> > >  Chief Technical Architect
> > >  Agile Technology Architects
> > >
> > >
> > >  On 1/30/2013 9:42 AM, Jack Kingsley wrote:
> > > >  >  Maybe this is it:
> > > >  >
> > > >  >
> > >  http://www-912.ibm.com/s_dir/SLKBase.nsf/1ac66549a21402188625680b0002037e/02eae6f58c4cc0e886257a3a0042647c?OpenDocument
> > > >  >
> > > >  >
> > > >  >
> > > >  >  On Wed, Jan 30, 2013 at 10:40 AM, Jack Kingsley<iseriesflorida@xxxxxxxxx
> > > >  >wrote:
> > > >  >
> > > > > >  >>  >    Jim, are you talking WAS 8.5 Express, I did something like this a
> > >  while
> > > > > >  >>  >    back, I know you have to use installation manager and QSH/PASE I
> > >  believe.
> > > > > >  >>  >
> > > > > >  >>  >
> > > > > >  >>  >    On Tue, Jan 29, 2013 at 3:11 PM, Jim Oberholtzer<
> > > > > >  >>  >    midrangel@xxxxxxxxxxxxxxxxx>   wrote:
> > > > > >  >>  >
> > > > > > > >  >>>  >>    Cross posted on Midrange-L and Web400.
> > > > > > > >  >>>  >>
> > > > > > > >  >>>  >>    Does anyone have the installation instructions for loading the WAS
> > >  8.5
> > > > > > > >  >>>  >>    Express Supplements?  Since IBM does not seem to have any real
> > > > > > > >  >>>  >>    installation documentation that I can find, and I'm not the least
> > >  bit
> > > > > > > >  >>>  >>    clairvoyant, I'd appreciate some guidance.
> > > > > > > >  >>>  >>
> > > > > > > >  >>>  >>    --
> > > > > > > >  >>>  >>    Jim Oberholtzer
> > > > > > > >  >>>  >>    Chief Technical Architect
> > > > > > > >  >>>  >>    Agile Technology Architects
> > > > > > > >  >>>  >>
> > > > > > > >  >>>  >>    --
> > >  --