Re: "Run RPG Unit Test" prompt? -- WDSCI-L

Sorry, I did not correctly read your message. I tested RPGUnit with my jobd and it works nicely:

a) First I got an error because I only had QGPL and QTEMP in my jobd.
b) Then I added library RPGUNIT to my jobd and successfully executed the test suite.

Here is what I found in the job log:

Client request - run program *LIBL/RUPGMRMT.
Ownership of object RUPROCLIST in QTEMP type *USRSPC changed.
Cannot resolve to object RUTESTCASE. Type and Subtype X'0203' Authority
X'0000'.
Fehler beim Aufruf von API QleActBndPgm.
RPGUnit Error. Error while loading the test suite in RPGUNIT/RUPLUGINT1.
Client request - run program QSYS/QUSDLTUS.
Client request - run program QGY/QGYCLST.
Client request - run program QGY/QGYCLST.
Client request - run program QGY/QGYCLST.
Client request - run program QGY/QGYOLOBJ.
Client request - run program QGY/QGYOLOBJ.
Client request - run program QGY/QGYOLOBJ.
Client request - run program QSYS/QUSCRTUS.
Ownership of object RU26363817 in QTEMP type *USRSPC changed.
Client request - run program *LIBL/RUPGMRMT.
Ownership of object RUPROCLIST in QTEMP type USRSPC changed.
Replaced object RUPROCLIST type *USRSPC was moved to QRPLOBJ.
Attempt made to divide by zero for fixed point operation.
Expected '', but was '
Fail from inside a monitor block
Expected 1, but was 2.
FAILURE: 1
FAILURE: 2
Ownership of object RUMODLIST in QTEMP type *USRSPC changed.
ERROR. 5 test cases, 8 assertions, 4 failures, 1 error.

Thomas.

-----Ursprüngliche Nachricht-----
Von: WDSCI-L [mailto:wdsci-l-bounces@xxxxxxxxxxxx] Im Auftrag von Edmund Reinhardt
Gesendet: Dienstag, 15. Mai 2018 04:53
An: wdsci-l@xxxxxxxxxxxx
Cc: wdsci-l@xxxxxxxxxxxx
Betreff: Re: [WDSCI-L] "Run RPG Unit Test" prompt?

Hi Thomas
Yes *DFT does load RPGUNIT JOBD in the library of the test program
But if I specify the REINHARD JOBD in the REINHARD library, it does not
pick it up. I get a message that the REINHARD/REINHARD JOBD is not found.
But it definitely exists.

----- Original message -----
From: Tools/400 <thomas.raddatz@xxxxxxxxxxx>
Sent by: "WDSCI-L" <wdsci-l-bounces@xxxxxxxxxxxx>
To: wdsci-l@xxxxxxxxxxxx
Cc:
Subject: Re: [WDSCI-L] "Run RPG Unit Test" prompt?
Date: Mon, May 14, 2018 4:17 PM

Sorry for the mess I caused when moving iRPGUnit to SourceForge.

Edmund, please open a ticket at SourceForge and report the problem you
had with the jobd to me. Are you sure that you had a jobd called
"RPGUNIT" in the library of the test suite service program, when you set
"Job description" to "*DFT" in the RPGUnit preferences? When jobd is set
to "*DFT" the actual name is set like this:

private I5ObjectName getDefaultJobDescription(
QSYSObjectPathName aUnitTestServiceprogram) {
return new I5ObjectName(
"RPGUNIT",
aUnitTestServiceprogram.getLibraryName());
}

Last but not least it might be worth to know that I created a iRPGUnit
solution at the Eclipse Marketplace:

[1]https://marketplace.eclipse.org/content/irpgunit

Thomas.

Am 14.05.2018 um 19:45 schrieb Ken Killian:
> Nope, I was using the old install path. It worked last week for a new
IBM i Developer:
>
> RPG Unit - [2]http://www.tools400.de/rpgunit/update/rdp8.0/
>
> I guess I didn't realized it had changed. I thought that was just
testing for something new.
>
> Just install the new version, 2.2.2R on my RDI! Yipee!
>
> I will send an update to our IBM i Developers here.
>
> Thanks! I missed that.
>
>
>
> -Ken Killian-
>
>
> -----Original Message-----
> From: WDSCI-L <wdsci-l-bounces@xxxxxxxxxxxx> On Behalf Of Edmund
Reinhardt
> Sent: Monday, May 14, 2018 1:37 PM
> To: wdsci-l@xxxxxxxxxxxx
> Cc: wdsci-l@xxxxxxxxxxxx
> Subject: Re: [WDSCI-L] "Run RPG Unit Test" prompt?
>
> Hi Ken,
> Thomas told me that he has moved the update site to
> [1][3]https://irpgunit.sourceforge.io/eclipse/rdi8.0/
> Is that the one you were trying to access?
>
> I had some challenges with the RPGUNIT in LIBL requirement.
> I solved it by creating a RPGUNIT JOBD in the lib of the tested
program.
> The other way that worked was to set the RPGUNIT preferences to use
> *CURRENT as the LIBL
> (This would work with your approach of setting the RSE connection
to have
> RPGUNIT in the LIBL)
> What did not work for me was point to non-default JOBD. I guess I
should
> open a bug.
>
> Edmund
>
>
> ----- Original message -----
> From: Ken Killian <kkillian@xxxxxxxxxxxx>
> Sent by: "WDSCI-L" <wdsci-l-bounces@xxxxxxxxxxxx>
> To: Rational Developer for IBM i / Websphere Development Studio
Client
> for System i & iSeries <wdsci-l@xxxxxxxxxxxx>
> Cc:
> Subject: Re: [WDSCI-L] "Run RPG Unit Test" prompt?
> Date: Mon, May 14, 2018 10:00 AM
>
> Edmund/Thomas,
>
> I was trying to get a new IBM i Developer to get RPG-UNIT
installed this
> morning, and the web-site seems to be *STILL* down...
> <frown>
>
> Before the web-site went down, I was able to get it installed for
> another IBM i Developer. I had a heck of time get RPG-UNIT to
work on
> their new RDI install...
>
> Once again a library-list issue. Since RPG-UNIT seems to create a
new
> instance when it runs the RPG-Unit.
>
> My profile has the library "RPGUNIT" on my library list, so no
problem
> for me.
>
> A quick work around to fix the library-list issue in RDI/RPG-UNIT
it
> this:
> 1.) In Remote system, right click your connection and select
properties
> 2.) Select "Subsystem"
> 3.) Add library "RPGUNIT", Library Position: *LAST
> 5.) Disconnect and reconnect. Problem Solved!
>
> After doing that on the new Developer's RDI/RPGUNIT worked
flawless.
> Just a good tip to share...
>
> -Ken Killian-
>
> -----Original Message-----
> From: WDSCI-L <wdsci-l-bounces@xxxxxxxxxxxx> On Behalf Of Edmund
> Reinhardt
> Sent: Friday, May 11, 2018 11:46 AM
> To: wdsci-l@xxxxxxxxxxxx
> Cc: wdsci-l@xxxxxxxxxxxx
> Subject: Re: [WDSCI-L] "Run RPG Unit Test" prompt?
>
> Thomas,
> Thank you so much for bringing me up to speed on RPGUnit,
since I am
> trying to promote it now.
>
> However today, I am seeing that the update site is not up. Is
this
> temporary?
> [1][2][4]http://www.tools400.de/rpgunit/update/rdp8.0/
>
> ----- Original message -----
> From: Tools/400 <thomas.raddatz@xxxxxxxxxxx>
> Sent by: "WDSCI-L" <wdsci-l-bounces@xxxxxxxxxxxx>
> To: wdsci-l@xxxxxxxxxxxx
> Cc:
> Subject: Re: [WDSCI-L] "Run RPG Unit Test" prompt?
> Date: Thu, May 10, 2018 9:50 AM
>
> Hi Edmund,
>
> The 31s0 data type is a historical thing. Now it is
impossible to
> change
> the procedure interface without breaking binary backward
> compatibility.
> RPGUnit from "lacton" is were the history of RPGUnit began:
>
>
[2][3][5]https://sourceforge.net/projects/rpgunit/?source=directory
>
>
[3][4][6]https://sourceforge.net/p/rpgunit/feature-requests/3/
> No response to my posting from 2014-08-25.
>
>
>
[4][5][7]https://sourceforge.net/p/rpgunit/discussion/608727/thread/6c55c5fd/
> No response to my posting from 2012-05-15.
>
>
>
[5][6][8]https://sourceforge.net/p/rpgunit/discussion/608727/thread/09367a0d/
> Mihaels's opinion regarding the project activity from
2017-12-14.
>
> Then Mihael Schmidt forked the RPG code because there was no
> response
> from the original developer and he assumed the project is
dead.
> Mihael
> basically added the user space interface to integrate
RPGUnit into
> RPGNextGen. He called the utility ILEUnit but never made the
> plug-in
> portion available:
>
>
[6][7][9]https://sourceforge.net/projects/ileunit/?source=directory
>
> I do not remember the details, but Mihael passed his plug-in
code
> (used
> in RPGNextGen) to me for whatever reasons (that I do not
remember).
> I
> refactored some aspects in the RPG code and greatly enhanced
the
> plug-in. Basically I fixed some quick & dirty RPG things and
I
> improved
> the user space interface to get more information back into
RDi.
> Next I
> spend a lot of work in making the RPG code more robust when
it
> comes to
> unexpected runtime errors. Last but not least I translated
the
> plug-in
> to German and added the help pages. I called the utility
iRPGUnit:
>
>
[7][8][10]https://sourceforge.net/projects/irpgunit/?source=directory
>
> Now the idea is to join ILEUnit and iRPGUnit again. I hope
that we
> get
> it done until the end of the year. I have a whole bunch of
other
> ideas
> what to do in Summer and Autumn.
>
> You can already compare DATE, TIME and TIMESTAMP values
using the
> pure
> assert() procedure:
>
> assert(actualDate = expectedDate: errorMsg);
>
> But of course it is not a big deal to add special procedures
for
> that.
> People may add a feature request if they are interested in
that.
>
> Comparing UCS data, however, is a good idea, although you
can also
> use
> assert() for it. People may also add a features request for
that.
>
> Thomas.
>
> .
> --
> This is the Rational Developer for IBM i / Websphere Development
Studio
> Client for System i & iSeries (WDSCI-L) mailing list
> To post a message email: WDSCI-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: [9][11]https://lists.midrange.com/mailman/listinfo/wdsci-l
> or email: WDSCI-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at [10][12]https://archive.midrange.com/wdsci-l.
>
>
>
>
> References
>
> Visible links
> 1. [13]https://irpgunit.sourceforge.io/eclipse/rdi8.0/
> 2. [14]http://www.tools400.de/rpgunit/update/rdp8.0/
> 3. [15]https://sourceforge.net/projects/rpgunit/?source=directory
> 4. [16]https://sourceforge.net/p/rpgunit/feature-requests/3/
> 5.
[17]https://sourceforge.net/p/rpgunit/discussion/608727/thread/6c55c5fd/
> 6.
[18]https://sourceforge.net/p/rpgunit/discussion/608727/thread/09367a0d/
> 7. [19]https://sourceforge.net/projects/ileunit/?source=directory
> 8. [20]https://sourceforge.net/projects/irpgunit/?source=directory
> 9. [21]https://lists.midrange.com/mailman/listinfo/wdsci-l
> 10. [22]https://archive.midrange.com/wdsci-l
> --
> This is the Rational Developer for IBM i / Websphere Development
Studio Client for System i & iSeries (WDSCI-L) mailing list To post a
message email: WDSCI-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change
list options,
> visit: https://lists.midrange.com/mailman/listinfo/wdsci-l
> or email: WDSCI-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives at
[23]https://archive.midrange.com/wdsci-l.
>

--
This is the Rational Developer for IBM i / Websphere Development Studio
Client for System i & iSeries (WDSCI-L) mailing list
To post a message email: WDSCI-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: [24]https://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at [25]https://archive.midrange.com/wdsci-l.

References

Visible links
1. https://marketplace.eclipse.org/content/irpgunit
2. http://www.tools400.de/rpgunit/update/rdp8.0/
3. https://irpgunit.sourceforge.io/eclipse/rdi8.0/
4. http://www.tools400.de/rpgunit/update/rdp8.0/
5. https://sourceforge.net/projects/rpgunit/?source=directory
6. https://sourceforge.net/p/rpgunit/feature-requests/3/
7. https://sourceforge.net/p/rpgunit/discussion/608727/thread/6c55c5fd/
8. https://sourceforge.net/p/rpgunit/discussion/608727/thread/09367a0d/
9. https://sourceforge.net/projects/ileunit/?source=directory
10. https://sourceforge.net/projects/irpgunit/?source=directory
11. https://lists.midrange.com/mailman/listinfo/wdsci-l
12. https://archive.midrange.com/wdsci-l
13. https://irpgunit.sourceforge.io/eclipse/rdi8.0/
14. http://www.tools400.de/rpgunit/update/rdp8.0/
15. https://sourceforge.net/projects/rpgunit/?source=directory
16. https://sourceforge.net/p/rpgunit/feature-requests/3/
17. https://sourceforge.net/p/rpgunit/discussion/608727/thread/6c55c5fd/
18. https://sourceforge.net/p/rpgunit/discussion/608727/thread/09367a0d/
19. https://sourceforge.net/projects/ileunit/?source=directory
20. https://sourceforge.net/projects/irpgunit/?source=directory
21. https://lists.midrange.com/mailman/listinfo/wdsci-l
22. https://archive.midrange.com/wdsci-l
23. https://archive.midrange.com/wdsci-l
24. https://lists.midrange.com/mailman/listinfo/wdsci-l
25. https://archive.midrange.com/wdsci-l