× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  1.  Home
  2. RPG400-L
  3. March 2006

AW: Create table not working....

Hi,

SQLCOD -679 means:
Object &1 in &2 type *&3 not created due to pending operation.

The object &1 has an outstanding DROP or CREATE under commitment control
which is preventing the create. This could have occurred in one of the
following ways:
 - This application process has performed a DROP under commitment control
   which has not been committed and is now trying to create the same object
   using commitment control level *NONE.
 - A different application process has performed a DROP under commitment
control
   which has not been committed.
 - This application process has performed a DROP under commitment control
   using a different commit definition and the DROP   has not been
committed.
 - This application process has performed a CREATE under commitment control
   which has not been committed and is now trying to use the object on a
   subsequent CREATE under commitment control level *NONE.

Do one of the following and try the request again:
- If it was your application process which issued the uncommitted DROP or
CREATE
  statement then issue a COMMIT before attempting the creation of the object
  or issue the CREATE statement from a program using a commitment control
level
  other than *NONE.
- If the application process that issued the DROP on this object is not your
application,
  then that application process must perform a COMMIT or a ROLLBACK of the
DROP statement.
- If your application process issued the uncommitted DROP or CREATE
statement
  under a different commit definition, issue a COMMIT or ROLLBACK for that
commit definition.


Mit freundlichen Gruessen / Best regards

Birgitta

"Shoot for the moon, even if you miss, you'll land among the stars."
(Les Brown)

-----Ursprungliche Nachricht-----
Von: rpg400-l-bounces@xxxxxxxxxxxx
[mailto:rpg400-l-bounces@xxxxxxxxxxxx]Im Auftrag von Mike Troxclaire
Gesendet: Montag, 27. Marz 2006 19:24
An: rpg400-l@xxxxxxxxxxxx
Betreff: RE: Create table not working....


Pros,
Thanks for all the responses. I tried removing the 'AS' and it does not
compile. I can execute it perfectly the way it is as a SQL Script. I tried
the command in STRSQL going directly to the green screen and it works just
fine. I tried to display the SQL codes and I am getting 57006 for SQLSTT and
'679-' for SQLCOD. I tried to insert this block of code but in vain....
     C/EXEC SQL
     C+ Set Option
     C+     Naming    = *Sys,
     C+     Commit    = *None,
     C+     UsrPrf    = *User,
     C+     DynUsrPrf = *User,
     C+     Datfmt    = *iso,
     C+     CloSqlCsr = *EndMod
     C/END-EXEC

any other suggestions???

Cheers,

Mike.


>From: rpg400-l-request@xxxxxxxxxxxx
>Reply-To: rpg400-l@xxxxxxxxxxxx
>To: rpg400-l@xxxxxxxxxxxx
>Subject: RPG400-L Digest, Vol 5, Issue 369
>Date: Mon, 27 Mar 2006 11:06:23 -0600
>MIME-Version: 1.0
>Received: from mail.midrange.com ([69.3.23.26]) by
>bay0-mc10-f15.bay0.hotmail.com with Microsoft SMTPSVC(6.0.3790.1830); Mon,
>27 Mar 2006 09:06:29 -0800
>Received: from rivendell.midrange.com (localhost [127.0.0.1])by
>mail.midrange.com (8.13.6/8.13.6) with ESMTP id k2RH6RxA000822;Mon, 27 Mar
>2006 11:06:27 -0600
>X-Message-Info: vGzX0e+ktu4gX0CywIMLrHkpFA9XZ4cUtDBFLEAIOdw=
>X-BeenThere: rpg400-l@xxxxxxxxxxxx
>X-Mailman-Version: 2.1.7
>Precedence: list
>List-Id: RPG programming on the AS400 / iSeries <rpg400-l.midrange.com>
>List-Unsubscribe:
><http://lists.midrange.com/mailman/listinfo/rpg400-l>,<mailto:rpg400-l-requ
est@xxxxxxxxxxxx?subject=unsubscribe>
>List-Archive: <http://archive.midrange.com/rpg400-l>
>List-Post: <mailto:rpg400-l@xxxxxxxxxxxx>
>List-Help: <mailto:rpg400-l-request@xxxxxxxxxxxx?subject=help>
>List-Subscribe:
><http://lists.midrange.com/mailman/listinfo/rpg400-l>,<mailto:rpg400-l-requ
est@xxxxxxxxxxxx?subject=subscribe>
>Errors-To: rpg400-l-bounces@xxxxxxxxxxxx
>Return-Path: rpg400-l-bounces@xxxxxxxxxxxx
>X-OriginalArrivalTime: 27 Mar 2006 17:06:30.0289 (UTC)
>FILETIME=[CAB24810:01C651C0]
>
>Send RPG400-L mailing list submissions to
>       rpg400-l@xxxxxxxxxxxx
>
>To subscribe or unsubscribe via the World Wide Web, visit
>       http://lists.midrange.com/mailman/listinfo/rpg400-l
>or, via email, send a message with subject or body 'help' to
>       rpg400-l-request@xxxxxxxxxxxx
>
>You can reach the person managing the list at
>       rpg400-l-owner@xxxxxxxxxxxx
>
>When replying, please edit your Subject line so it is more specific
>than "Re: Contents of RPG400-L digest..."
>
>
>*** NOTE: When replying to this digest message, PLEASE remove all text
>unrelated to your reply and change the subject line so it is meaningful.
>
>Today's Topics:
>
>    1. RE: GLOBAL TEMPORARY TABLE issues (Wilt, Charles)
>    2. RE: GLOBAL TEMPORARY TABLE issues (Tyler, Matt)
>    3. Create table not working.... (Mike Troxclaire)
>    4. RE: Create table not working.... (Fleming, Greg (ED))
>    5. RE: Create table not working.... (DeLong, Eric)
>    6. Re: Create table not working.... (Michael_Schutte@xxxxxxxxxxxx)
>
>
>----------------------------------------------------------------------
>
>message: 1
>date: Mon, 27 Mar 2006 07:58:06 -0500
>from: "Wilt, Charles" <CWilt@xxxxxxxxxxxx>
>subject: RE: GLOBAL TEMPORARY TABLE issues
>
> > -----Original Message-----
> > From: rpg400-l-bounces@xxxxxxxxxxxx
> > [mailto:rpg400-l-bounces@xxxxxxxxxxxx] On Behalf Of Tyler, Matt
> > Sent: Friday, March 24, 2006 11:38 AM
> > To: RPG programming on the AS400 / iSeries
> > Subject: RE: GLOBAL TEMPORARY TABLE issues
><snip>
> >
> >     The solution we need must be compatible with our CMS product
> > from Aldon.  So, during promotion time the model file object
> > must exist
> > because all promotions to the next environment must be done in batch.
> > We do not want to build special exit program processing just for this
> > one instance.  We could create the model file using SQL and add it to
> > Aldon as a non-source based object, but as I said before our current
> > standard is to use DDS only for files.
> >
>
>Matt,
>
>Why would you need to create the object as non-source based in Aldon?
>
>Unless you're on a really old version of Aldon, Aldon supports SQL
>objects, *TABLE, *VIEW, *INDEX, *FUNCTN, *PROC, and *TRIGGER as pseudo
>source objects.  You can check them out, edit, create, and promote them
>just like DDS defined *FILEs.
>
>HTH,
>
>Charles
>
>
>
>
>
>------------------------------
>
>message: 2
>date: Mon, 27 Mar 2006 07:48:30 -0700
>from: "Tyler, Matt" <mattt@xxxxxxxxxxxxxx>
>subject: RE: GLOBAL TEMPORARY TABLE issues
>
>Yes I know, but our standards for source limit what type of source is
>used to create objects (for the moment).  The only other way to get a
>non-DDS based object into Aldon (for us) is to make it non-source based.
>
>
>Thanks, Matt
>
>
>-----Original Message-----
>From: rpg400-l-bounces@xxxxxxxxxxxx
>[mailto:rpg400-l-bounces@xxxxxxxxxxxx] On Behalf Of Wilt, Charles
>Sent: Monday, March 27, 2006 5:58 AM
>To: RPG programming on the AS400 / iSeries
>Subject: RE: GLOBAL TEMPORARY TABLE issues
>
> > -----Original Message-----
> > From: rpg400-l-bounces@xxxxxxxxxxxx
> > [mailto:rpg400-l-bounces@xxxxxxxxxxxx] On Behalf Of Tyler, Matt
> > Sent: Friday, March 24, 2006 11:38 AM
> > To: RPG programming on the AS400 / iSeries
> > Subject: RE: GLOBAL TEMPORARY TABLE issues
><snip>
> >
> >     The solution we need must be compatible with our CMS product
> > from Aldon.  So, during promotion time the model file object
> > must exist
> > because all promotions to the next environment must be done in batch.
> > We do not want to build special exit program processing just for this
> > one instance.  We could create the model file using SQL and add it to
> > Aldon as a non-source based object, but as I said before our current
> > standard is to use DDS only for files.
> >
>
>Matt,
>
>Why would you need to create the object as non-source based in Aldon?
>
>Unless you're on a really old version of Aldon, Aldon supports SQL
>objects, *TABLE, *VIEW, *INDEX, *FUNCTN, *PROC, and *TRIGGER as pseudo
>source objects.  You can check them out, edit, create, and promote them
>just like DDS defined *FILEs.
>
>HTH,
>
>Charles
>
>
>
>--
>
>This is the RPG programming on the AS400 / iSeries (RPG400-L) mailing
>list
>To post a message email: RPG400-L@xxxxxxxxxxxx
>To subscribe, unsubscribe, or change list options,
>visit: http://lists.midrange.com/mailman/listinfo/rpg400-l
>or email: RPG400-L-request@xxxxxxxxxxxx
>Before posting, please take a moment to review the archives
>at http://archive.midrange.com/rpg400-l.
>
>
>
>
>------------------------------
>
>message: 3
>date: Mon, 27 Mar 2006 10:37:23 -0600
>from: "Mike Troxclaire" <mike_troxclaire@xxxxxxxxxxx>
>subject: Create table not working....
>
>Pro's,
>
>I am trying to execute a simple SQL embedded RPG program and it compiles
>and
>runs fine(It displays the final message 'PHYS FILE CREATED.....'  but I am
>not finding the physical file it is supposed to create. I do not know what
>I
>am doing wrong. Any help is much appreciated. Please bear with me, I am
>still new to RPG so I might be doing something really      wrong. This code
>executes just fine when I run it as a standalone SQL script. The only
>difference is that library name and file name are separated by a '.'
>instead
>of '/'.  Here is the code that I am trying to execute....
>==============================================================
>      D EXTERNALDS    E DS                  EXTNAME(MAR_2006)
>      C/Exec Sql
>      C+ CREATE TABLE TESTING/TTABL AS
>      C+ (select CSTEQUIFAX.CSTNUM, CSTMST.CSNAME,
>      C+ CSTMST.CSSTCD, CSTMST.CSADD2, CSTMST.CSCTST,
>      C+ CSTMST.CSZIPA, CSTMST.CSPHON, CSTMST.CSDELT,
>      C+ CSTMST.CSDNB2, CSTMST.CSDTAD, CSTMST.CSDELD,
>      C+ CSTMST.CSCRLT, CSTMST.CSHCRD, CSTMST.CSDTMY,
>      C+ CSTMST.CSLPYA, CSTMST.CSDTPY, CSTMST.CSTOTB,
>      C+ CSTMST.CSBL30, CSTMST.CSBL60, CSTMST.CSBL90,
>      C+ CSTMST.CSBL99, CSTMST.CSARTM, ARTERM1.ARTFDS,
>      C+ CSTUDD.CSUD40, (CSTMST.CSBLCU+CSTMST.CSBLFU)
>      C+ AS TOTAL,
>      C+ (CSTMST.CSBL30+CSTMST.CSBL60+CSTMST.CSBL90+
>      C+ CSTMST.CSBL99) AS TOTAL_PAST_DUE,CSTMST.CSHIST,
>      C+ MAXINVOICE.MAXARINET, MAXINVOICE.ARDATE,
>      C+ CSTUDD.CSUD03,CSTSHP.CSHP3, CSTSHP.CSHP6,
>      C+ CSTSHP.CSHPZA from ec30data/cstequifax as
>      C+ cstequifax left outer join ec30data/cstmst
>      C+ as cstmst on cstequifax.cstnum = cstmst.cstnum
>      C+ left outer join ec30data/cstudd as cstudd
>      C+ on cstequifax.cstnum = cstudd.cstnum left
>      C+ outer join ec30data/cstshp as cstshp on
>      C+ cstequifax.cstnum = cstshp.cstnum left outer
>      C+ join ec30data/maxinvoice as maxinvoice on
>      C+ cstequifax.cstnum = maxinvoice.arcnum left
>      C+ outer join ec30data/arterm1 as arterm1 on
>      C+ cstmst.csartm = arterm1.artftc where
>      C+ (cstmst.csctst like '%,%' and cstshp.cshp6
>      C+ like '%,%'  AND CSTMST.CSARTM NOT LIKE '% %')
>      C+ and (CSTMST.CSDELT = '' or CSTMST.CSDELT = 'I'
>      C+ or CSTMST.CSDELD > 20051218) GROUP BY
>      C+ CSTEQUIFAX.CSTNUM, CSTMST.CSNAME, CSTMST.CSSTCD,
>      C+ CSTMST.CSADD2, CSTMST.CSCTST, CSTMST.CSZIPA,
>      C+ CSTMST.CSPHON, CSTMST.CSDELT, CSTMST.CSDNB2,
>      C+ CSTMST.CSDTAD,CSTMST.CSDELD, CSTMST.CSCRLT,
>      C+ CSTMST.CSHCRD, CSTMST.CSDTMY,CSTMST.CSLPYA,
>      C+ CSTMST.CSDTPY, CSTMST.CSTOTB, CSTMST.CSBLCU,
>      C+ CSTMST.CSBLFU, CSTMST.CSBL30, CSTMST.CSBL60,
>      C+ CSTMST.CSBL90,CSTMST.CSBL99, CSTMST.CSHIST,
>      C+ MAXINVOICE.MAXARINET, MAXINVOICE.ARDATE,
>      C+ CSTUDD.CSUD03, CSTUDD.CSUD40, CSTSHP.CSHP3,
>      C+ CSTSHP.CSHP6, CSTSHP.CSHPZA, ARTERM1.ARTFDS,
>      C+ CSTMST.CSARTM) WITH DATA
>      C/End-Exec
>       /free
>          dsply 'PHYS FILE CREATED, END OF PROGRAM';
>          *inlr = *on;
>       /end-free
>============================================================
>
>Cheers,
>
>Mike.
>
>_________________________________________________________________
>Express yourself instantly with MSN Messenger! Download today - it's FREE!
>http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
>
>
>
>------------------------------
>
>message: 4
>date: Mon, 27 Mar 2006 11:59:27 -0500
>from: "Fleming, Greg \(ED\)" <GFLEMING@xxxxxxxxxxxxxxxxxxxx>
>subject: RE: Create table not working....
>
>Mike,
>
>That code will display your message whether the SQL succeeds or fails.
>You can examine the SQL return codes in the SQLCOD and SQLSTT fields of
>the SQLCA data structure, and condition your display accordingly.
>
>Being somewhat new to embedded SQL myself, I don't see anything wrong
>right off the bat, but if you put the program in debug and put the break
>on your display message, you can examine the aforementioned codes and
>see what you get.
>
>Follow the "SQL Messages and Codes" link from the following page to
>decipher their meaning:
>
>http://publib.boulder.ibm.com/infocenter/iseries/v5r3/index.jsp?topic=/d
>b2/rbafzmstcksql.htm
>
>
>
>|-----Original Message-----
>|From: rpg400-l-bounces@xxxxxxxxxxxx
>[mailto:rpg400-l-bounces@xxxxxxxxxxxx]
>|On Behalf Of Mike Troxclaire
>|Sent: Monday, March 27, 2006 11:37 AM
>|To: rpg400-l@xxxxxxxxxxxx
>|Subject: Create table not working....
>|
>|Pro's,
>|
>|I am trying to execute a simple SQL embedded RPG program and it
>compiles
>|and
>|runs fine(It displays the final message 'PHYS FILE CREATED.....'  but I
>am
>|not finding the physical file it is supposed to create. I do not know
>what
>|I
>|am doing wrong. Any help is much appreciated. Please bear with me, I am
>|still new to RPG so I might be doing something really      wrong. This
>code
>|executes just fine when I run it as a standalone SQL script. The only
>|difference is that library name and file name are separated by a '.'
>|instead
>|of '/'.  Here is the code that I am trying to execute....
>|==============================================================
>|     D EXTERNALDS    E DS                  EXTNAME(MAR_2006)
>|     C/Exec Sql
>|     C+ CREATE TABLE TESTING/TTABL AS
>|     C+ (select CSTEQUIFAX.CSTNUM, CSTMST.CSNAME,
>|     C+ CSTMST.CSSTCD, CSTMST.CSADD2, CSTMST.CSCTST,
>|     C+ CSTMST.CSZIPA, CSTMST.CSPHON, CSTMST.CSDELT,
>|     C+ CSTMST.CSDNB2, CSTMST.CSDTAD, CSTMST.CSDELD,
>|     C+ CSTMST.CSCRLT, CSTMST.CSHCRD, CSTMST.CSDTMY,
>|     C+ CSTMST.CSLPYA, CSTMST.CSDTPY, CSTMST.CSTOTB,
>|     C+ CSTMST.CSBL30, CSTMST.CSBL60, CSTMST.CSBL90,
>|     C+ CSTMST.CSBL99, CSTMST.CSARTM, ARTERM1.ARTFDS,
>|     C+ CSTUDD.CSUD40, (CSTMST.CSBLCU+CSTMST.CSBLFU)
>|     C+ AS TOTAL,
>|     C+ (CSTMST.CSBL30+CSTMST.CSBL60+CSTMST.CSBL90+
>|     C+ CSTMST.CSBL99) AS TOTAL_PAST_DUE,CSTMST.CSHIST,
>|     C+ MAXINVOICE.MAXARINET, MAXINVOICE.ARDATE,
>|     C+ CSTUDD.CSUD03,CSTSHP.CSHP3, CSTSHP.CSHP6,
>|     C+ CSTSHP.CSHPZA from ec30data/cstequifax as
>|     C+ cstequifax left outer join ec30data/cstmst
>|     C+ as cstmst on cstequifax.cstnum = cstmst.cstnum
>|     C+ left outer join ec30data/cstudd as cstudd
>|     C+ on cstequifax.cstnum = cstudd.cstnum left
>|     C+ outer join ec30data/cstshp as cstshp on
>|     C+ cstequifax.cstnum = cstshp.cstnum left outer
>|     C+ join ec30data/maxinvoice as maxinvoice on
>|     C+ cstequifax.cstnum = maxinvoice.arcnum left
>|     C+ outer join ec30data/arterm1 as arterm1 on
>|     C+ cstmst.csartm = arterm1.artftc where
>|     C+ (cstmst.csctst like '%,%' and cstshp.cshp6
>|     C+ like '%,%'  AND CSTMST.CSARTM NOT LIKE '% %')
>|     C+ and (CSTMST.CSDELT = '' or CSTMST.CSDELT = 'I'
>|     C+ or CSTMST.CSDELD > 20051218) GROUP BY
>|     C+ CSTEQUIFAX.CSTNUM, CSTMST.CSNAME, CSTMST.CSSTCD,
>|     C+ CSTMST.CSADD2, CSTMST.CSCTST, CSTMST.CSZIPA,
>|     C+ CSTMST.CSPHON, CSTMST.CSDELT, CSTMST.CSDNB2,
>|     C+ CSTMST.CSDTAD,CSTMST.CSDELD, CSTMST.CSCRLT,
>|     C+ CSTMST.CSHCRD, CSTMST.CSDTMY,CSTMST.CSLPYA,
>|     C+ CSTMST.CSDTPY, CSTMST.CSTOTB, CSTMST.CSBLCU,
>|     C+ CSTMST.CSBLFU, CSTMST.CSBL30, CSTMST.CSBL60,
>|     C+ CSTMST.CSBL90,CSTMST.CSBL99, CSTMST.CSHIST,
>|     C+ MAXINVOICE.MAXARINET, MAXINVOICE.ARDATE,
>|     C+ CSTUDD.CSUD03, CSTUDD.CSUD40, CSTSHP.CSHP3,
>|     C+ CSTSHP.CSHP6, CSTSHP.CSHPZA, ARTERM1.ARTFDS,
>|     C+ CSTMST.CSARTM) WITH DATA
>|     C/End-Exec
>|      /free
>|         dsply 'PHYS FILE CREATED, END OF PROGRAM';
>|         *inlr = *on;
>|      /end-free
>|============================================================
>|
>|Cheers,
>|
>|Mike.
>|
>|_________________________________________________________________
>|Express yourself instantly with MSN Messenger! Download today - it's
>FREE!
>|http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
>|
>|--
>|This is the RPG programming on the AS400 / iSeries (RPG400-L) mailing
>list
>|To post a message email: RPG400-L@xxxxxxxxxxxx
>|To subscribe, unsubscribe, or change list options,
>|visit: http://lists.midrange.com/mailman/listinfo/rpg400-l
>|or email: RPG400-L-request@xxxxxxxxxxxx
>|Before posting, please take a moment to review the archives
>|at http://archive.midrange.com/rpg400-l.
>
>
>
>
>------------------------------
>
>message: 5
>date: Mon, 27 Mar 2006 11:05:01 -0600
>from: "DeLong, Eric" <EDeLong@xxxxxxxxxxxxxxx>
>subject: RE: Create table not working....
>
>Not sure.....  One of the most common of mistakes when starting with
>embedded SQL is making sure to specify the correct level of commitment
>control.  Most developers do not journal in their test libraries, so
>commitment control should be set to *NONE on either the compile command or
>in an SQL options block in the source member.
>
>Could this be your problem?
>
>Eric DeLong
>Sally Beauty Company
>MIS-Project Manager (BSG)
>940-297-2863 or ext. 1863
>
>
>
>-----Original Message-----
>From: rpg400-l-bounces@xxxxxxxxxxxx
>[mailto:rpg400-l-bounces@xxxxxxxxxxxx]On Behalf Of Mike Troxclaire
>Sent: Monday, March 27, 2006 10:37 AM
>To: rpg400-l@xxxxxxxxxxxx
>Subject: Create table not working....
>
>
>Pro's,
>
>I am trying to execute a simple SQL embedded RPG program and it compiles
>and
>
>runs fine(It displays the final message 'PHYS FILE CREATED.....'  but I am
>not finding the physical file it is supposed to create. I do not know what
>I
>
>am doing wrong. Any help is much appreciated. Please bear with me, I am
>still new to RPG so I might be doing something really      wrong. This code
>executes just fine when I run it as a standalone SQL script. The only
>difference is that library name and file name are separated by a '.'
>instead
>
>of '/'.  Here is the code that I am trying to execute....
>==============================================================
>      D EXTERNALDS    E DS                  EXTNAME(MAR_2006)
>      C/Exec Sql
>      C+ CREATE TABLE TESTING/TTABL AS
>      C+ (select CSTEQUIFAX.CSTNUM, CSTMST.CSNAME,
>      C+ CSTMST.CSSTCD, CSTMST.CSADD2, CSTMST.CSCTST,
>      C+ CSTMST.CSZIPA, CSTMST.CSPHON, CSTMST.CSDELT,
>      C+ CSTMST.CSDNB2, CSTMST.CSDTAD, CSTMST.CSDELD,
>      C+ CSTMST.CSCRLT, CSTMST.CSHCRD, CSTMST.CSDTMY,
>      C+ CSTMST.CSLPYA, CSTMST.CSDTPY, CSTMST.CSTOTB,
>      C+ CSTMST.CSBL30, CSTMST.CSBL60, CSTMST.CSBL90,
>      C+ CSTMST.CSBL99, CSTMST.CSARTM, ARTERM1.ARTFDS,
>      C+ CSTUDD.CSUD40, (CSTMST.CSBLCU+CSTMST.CSBLFU)
>      C+ AS TOTAL,
>      C+ (CSTMST.CSBL30+CSTMST.CSBL60+CSTMST.CSBL90+
>      C+ CSTMST.CSBL99) AS TOTAL_PAST_DUE,CSTMST.CSHIST,
>      C+ MAXINVOICE.MAXARINET, MAXINVOICE.ARDATE,
>      C+ CSTUDD.CSUD03,CSTSHP.CSHP3, CSTSHP.CSHP6,
>      C+ CSTSHP.CSHPZA from ec30data/cstequifax as
>      C+ cstequifax left outer join ec30data/cstmst
>      C+ as cstmst on cstequifax.cstnum = cstmst.cstnum
>      C+ left outer join ec30data/cstudd as cstudd
>      C+ on cstequifax.cstnum = cstudd.cstnum left
>      C+ outer join ec30data/cstshp as cstshp on
>      C+ cstequifax.cstnum = cstshp.cstnum left outer
>      C+ join ec30data/maxinvoice as maxinvoice on
>      C+ cstequifax.cstnum = maxinvoice.arcnum left
>      C+ outer join ec30data/arterm1 as arterm1 on
>      C+ cstmst.csartm = arterm1.artftc where
>      C+ (cstmst.csctst like '%,%' and cstshp.cshp6
>      C+ like '%,%'  AND CSTMST.CSARTM NOT LIKE '% %')
>      C+ and (CSTMST.CSDELT = '' or CSTMST.CSDELT = 'I'
>      C+ or CSTMST.CSDELD > 20051218) GROUP BY
>      C+ CSTEQUIFAX.CSTNUM, CSTMST.CSNAME, CSTMST.CSSTCD,
>      C+ CSTMST.CSADD2, CSTMST.CSCTST, CSTMST.CSZIPA,
>      C+ CSTMST.CSPHON, CSTMST.CSDELT, CSTMST.CSDNB2,
>      C+ CSTMST.CSDTAD,CSTMST.CSDELD, CSTMST.CSCRLT,
>      C+ CSTMST.CSHCRD, CSTMST.CSDTMY,CSTMST.CSLPYA,
>      C+ CSTMST.CSDTPY, CSTMST.CSTOTB, CSTMST.CSBLCU,
>      C+ CSTMST.CSBLFU, CSTMST.CSBL30, CSTMST.CSBL60,
>      C+ CSTMST.CSBL90,CSTMST.CSBL99, CSTMST.CSHIST,
>      C+ MAXINVOICE.MAXARINET, MAXINVOICE.ARDATE,
>      C+ CSTUDD.CSUD03, CSTUDD.CSUD40, CSTSHP.CSHP3,
>      C+ CSTSHP.CSHP6, CSTSHP.CSHPZA, ARTERM1.ARTFDS,
>      C+ CSTMST.CSARTM) WITH DATA
>      C/End-Exec
>       /free
>          dsply 'PHYS FILE CREATED, END OF PROGRAM';
>          *inlr = *on;
>       /end-free
>============================================================
>
>Cheers,
>
>Mike.
>
>_________________________________________________________________
>Express yourself instantly with MSN Messenger! Download today - it's FREE!
>http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
>
>--
>This is the RPG programming on the AS400 / iSeries (RPG400-L) mailing list
>To post a message email: RPG400-L@xxxxxxxxxxxx
>To subscribe, unsubscribe, or change list options,
>visit: http://lists.midrange.com/mailman/listinfo/rpg400-l
>or email: RPG400-L-request@xxxxxxxxxxxx
>Before posting, please take a moment to review the archives
>at http://archive.midrange.com/rpg400-l.
>
>
>
>
>------------------------------
>
>message: 6
>date: Mon, 27 Mar 2006 12:06:12 -0500
>from: Michael_Schutte@xxxxxxxxxxxx
>subject: Re: Create table not working....
>
>Mike,
>
>Have you tried doing this command in STRSQL?
>
>Michael Schutte
>Work 614-492-7419
>email  michael_schutte@xxxxxxxxxxxx
>
>
>
>              "Mike Troxclaire"
>              <mike_troxclaire@
>              hotmail.com>                                               To
>              Sent by:                  rpg400-l@xxxxxxxxxxxx
>              rpg400-l-bounces@                                          cc
>              midrange.com
>                                                                    Subject
>                                        Create table not working....
>              03/27/2006 11:37
>              AM
>
>
>              Please respond to
>               RPG programming
>               on the AS400 /
>                   iSeries
>              <rpg400-l@midrang
>                   e.com>
>
>
>
>
>
>
>Pro's,
>
>I am trying to execute a simple SQL embedded RPG program and it compiles
>and
>runs fine(It displays the final message 'PHYS FILE CREATED.....'  but I am
>not finding the physical file it is supposed to create. I do not know what
>I
>am doing wrong. Any help is much appreciated. Please bear with me, I am
>still new to RPG so I might be doing something really      wrong. This code
>
>executes just fine when I run it as a standalone SQL script. The only
>difference is that library name and file name are separated by a '.'
>instead
>of '/'.  Here is the code that I am trying to execute....
>==============================================================
>      D EXTERNALDS    E DS                  EXTNAME(MAR_2006)
>      C/Exec Sql
>      C+ CREATE TABLE TESTING/TTABL AS
>      C+ (select CSTEQUIFAX.CSTNUM, CSTMST.CSNAME,
>      C+ CSTMST.CSSTCD, CSTMST.CSADD2, CSTMST.CSCTST,
>      C+ CSTMST.CSZIPA, CSTMST.CSPHON, CSTMST.CSDELT,
>      C+ CSTMST.CSDNB2, CSTMST.CSDTAD, CSTMST.CSDELD,
>      C+ CSTMST.CSCRLT, CSTMST.CSHCRD, CSTMST.CSDTMY,
>      C+ CSTMST.CSLPYA, CSTMST.CSDTPY, CSTMST.CSTOTB,
>      C+ CSTMST.CSBL30, CSTMST.CSBL60, CSTMST.CSBL90,
>      C+ CSTMST.CSBL99, CSTMST.CSARTM, ARTERM1.ARTFDS,
>      C+ CSTUDD.CSUD40, (CSTMST.CSBLCU+CSTMST.CSBLFU)
>      C+ AS TOTAL,
>      C+ (CSTMST.CSBL30+CSTMST.CSBL60+CSTMST.CSBL90+
>      C+ CSTMST.CSBL99) AS TOTAL_PAST_DUE,CSTMST.CSHIST,
>      C+ MAXINVOICE.MAXARINET, MAXINVOICE.ARDATE,
>      C+ CSTUDD.CSUD03,CSTSHP.CSHP3, CSTSHP.CSHP6,
>      C+ CSTSHP.CSHPZA from ec30data/cstequifax as
>      C+ cstequifax left outer join ec30data/cstmst
>      C+ as cstmst on cstequifax.cstnum = cstmst.cstnum
>      C+ left outer join ec30data/cstudd as cstudd
>      C+ on cstequifax.cstnum = cstudd.cstnum left
>      C+ outer join ec30data/cstshp as cstshp on
>      C+ cstequifax.cstnum = cstshp.cstnum left outer
>      C+ join ec30data/maxinvoice as maxinvoice on
>      C+ cstequifax.cstnum = maxinvoice.arcnum left
>      C+ outer join ec30data/arterm1 as arterm1 on
>      C+ cstmst.csartm = arterm1.artftc where
>      C+ (cstmst.csctst like '%,%' and cstshp.cshp6
>      C+ like '%,%'  AND CSTMST.CSARTM NOT LIKE '% %')
>      C+ and (CSTMST.CSDELT = '' or CSTMST.CSDELT = 'I'
>      C+ or CSTMST.CSDELD > 20051218) GROUP BY
>      C+ CSTEQUIFAX.CSTNUM, CSTMST.CSNAME, CSTMST.CSSTCD,
>      C+ CSTMST.CSADD2, CSTMST.CSCTST, CSTMST.CSZIPA,
>      C+ CSTMST.CSPHON, CSTMST.CSDELT, CSTMST.CSDNB2,
>      C+ CSTMST.CSDTAD,CSTMST.CSDELD, CSTMST.CSCRLT,
>      C+ CSTMST.CSHCRD, CSTMST.CSDTMY,CSTMST.CSLPYA,
>      C+ CSTMST.CSDTPY, CSTMST.CSTOTB, CSTMST.CSBLCU,
>      C+ CSTMST.CSBLFU, CSTMST.CSBL30, CSTMST.CSBL60,
>      C+ CSTMST.CSBL90,CSTMST.CSBL99, CSTMST.CSHIST,
>      C+ MAXINVOICE.MAXARINET, MAXINVOICE.ARDATE,
>      C+ CSTUDD.CSUD03, CSTUDD.CSUD40, CSTSHP.CSHP3,
>      C+ CSTSHP.CSHP6, CSTSHP.CSHPZA, ARTERM1.ARTFDS,
>      C+ CSTMST.CSARTM) WITH DATA
>      C/End-Exec
>       /free
>          dsply 'PHYS FILE CREATED, END OF PROGRAM';
>          *inlr = *on;
>       /end-free
>============================================================
>
>Cheers,
>
>Mike.
>
>_________________________________________________________________
>Express yourself instantly with MSN Messenger! Download today - it's FREE!
>http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
>
>--
>This is the RPG programming on the AS400 / iSeries (RPG400-L) mailing list
>To post a message email: RPG400-L@xxxxxxxxxxxx
>To subscribe, unsubscribe, or change list options,
>visit: http://lists.midrange.com/mailman/listinfo/rpg400-l
>or email: RPG400-L-request@xxxxxxxxxxxx
>Before posting, please take a moment to review the archives
>at http://archive.midrange.com/rpg400-l.
>
>
>
>
>
>------------------------------
>
>--
>This is the RPG programming on the AS400 / iSeries (RPG400-L) digest list
>To post a message email: RPG400-L@xxxxxxxxxxxx
>To subscribe, unsubscribe, or change list options,
>visit: http://lists.midrange.com/mailman/listinfo/rpg400-l
>or email: RPG400-L-request@xxxxxxxxxxxx
>Before posting, please take a moment to review the archives
>at http://archive.midrange.com/rpg400-l.
>
>
>
>End of RPG400-L Digest, Vol 5, Issue 369
>****************************************

_________________________________________________________________
Dont just search. Find. Check out the new MSN Search!
http://search.msn.click-url.com/go/onm00200636ave/direct/01/

As an Amazon Associate we earn from qualifying purchases.

This thread ...
Replies:
Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.