RE: change the Attribute of a field

["Mark A. Manske" <mmanske@xxxxxxxxxxxxxxxxxx>]

You can place the hex code in front of the data, and the closing hex code at
the end,
keep in mind that this bumps up your field size on the screen by two
positions -
IE: green reverse is hex 21, and close it with hex 20.

Check the archives, I do believe people have posted easy solutions to doing
this,
I am old and still enjoy doing all the work myself, so I dbu the source file
and change to hex mode to do this, most on this list use record/play keys,
or
have templates to be able to use "seu/pdm" to do the job, I've just never
taken
the time to use the short-cuts.

Following are the attributes that I have used:
20 - GREEN
21 - GREEN REVERSED
22 - WHITE
23 - WHITE REVERSED
24 - GREEN UNDERLINED
25 - GREEN REVERSED/UNDERLINED
26 - WHITE UNDERLINED
27 - NONDSP
28 - RED
29 - RED REVERSED
2A - RED HIGHLIGHTED
2B - RED REVERSED
2C - RED UNDERLINED
2D - RED REVERSED/UNDERLINED
2E - RED UNDERLINED/HIGHLIGHTED
2F - NONDSP
30 - TORQUISE (SHOWS COLUMN SEPARATORS)
31 - TORQUISE REVERSED (SHOWS COLUMN SEPARATORS)
32 - YELLOW (SHOWS COLUMN SEPARATORS)
33 - YELLOW REVERSED (SHOWS COLUMN SEPARATORS)
34 - TORQUISE UNDERLINED
35 - TORQUISE REVERSED/UNDERLINED
36 - YELLOW UNDERLINED
37 - NONDSP (SHOWS COLUMN SEPARATORS)
38 - PINK
39 - PINK REVERSED
3A - BLUE
3B - BLUE REVERSED
3C - PINK UNDERLINED
3D - PINK UNDERLINED/REVERSED
3E - BLUE UNDERLINED

HTH
Mark


-----Original Message-----
From: rpg400-l-admin@midrange.com [mailto:rpg400-l-admin@midrange.com]On
Behalf Of Tanveer, Mohammad
Sent: Wednesday, July 10, 2002 12:29 PM
To: 'rpg400-l@midrange.com'
Subject: change the Attribute of a field



[MST] How can I change the Attribute of a field on the Screen without using
any indicator.  I know we can but just forgot how to :)
_______________________________________________