RE: Barcoding - ZPL instruction ^B7

["Alex A Moore" <alexm@xxxxxxxxxxxxxxxx>]

You want to use a printer definition that is fairly "stupid".  3812 would
not be a good choice.  5225 would be better, but how is your printer
attached?  If through a dumb terminal, or a PC, that introduces another
variable.  We configure our's as 4214, but if attached through a PC (client
access) it will normally auto-configure as a 3812.

Here is some sample output that includes a maxi-code

¬XA¬EG¬XZ
¬XA¬EF¬XZ
¬XA¬MCY¬XZ
¬XA
¬CVY
¬XZ
¬XA¬MMC¬XZ
¬XA
¬LH0,0¬FS
¬LL1219¬FS
¬PON¬FS
¬XZ
¬XA
¬PRD¬FS
¬FT0020,0041¬A0N,0022,0028¬FD-*LINK¬FS
¬FT0446,0041¬A0N,0028,0036¬FD-*LINK¬FS
¬FT0610,0041¬A0N,0028,0036¬FD-*LINK¬FS
¬FT0020,0062¬A0N,0022,0028¬FD-*LINK¬FS
¬FT0020,0082¬A0N,0022,0028¬FD-*LINK¬FS
¬FT0020,0122¬A0N,0022,0028¬FD-*LINK¬FS
¬FT0020,0163¬A0N,0034,0034¬FD-*LINK¬FS
¬FT0122,0183¬A0N,0030,0034¬FD-*LINK¬FS
¬FT0132,0142¬A0N,0018,0024¬FD-*LINK¬FS
¬FT0020,0203¬A0N,0034,0034¬FD-*LINK¬FS
¬FT0122,0224¬A0N,0030,0034¬FD-*LINK¬FS
¬FT0122,0265¬A0N,0030,0034¬FD-*LINK¬FS
¬FT0122,0305¬A0N,0030,0034¬FD-*LINK¬FS
¬FT0122,0356¬A0N,0042,0046¬FD-*LINK¬FS
¬FT0294,0447¬A0N,0077,0081¬FD-*LINK¬FS
¬FT0020,0685¬A0N,0054,0058¬FD-*LINK¬FS
¬FT0020,0711¬A0N,0022,0024¬FD-*LINK¬FS
¬FT0122,0142¬A0N,0018,0024¬FD-*LINK¬FS
¬FT0548,0163¬A0N,0081,0091¬FD---¬FS
¬FT0030,0996¬ABN,0011,0007¬FD-*LINK¬FS
¬FT0203,1210¬ABN,0022,0014¬FD-*LINK¬FS
¬BY03,0.0¬FS
¬FT0345,0570¬BCN,0111,N,N,N,N
¬FD>;0000000000000¬FS
¬BY02,2.0¬FS
¬FT0030,0590¬BD4¬FH
¬FD000000000000000000000000000000¬FS
¬BY03,0.0¬FS
¬FT0061,0939¬BCN,0203,N,N,N,N
¬FD>:0000000000000000000000¬FS
¬BY04,0.0¬FS
¬FT0091,1179¬BCN,0162,N,N,N
¬FD>;>800000000000000000000¬FS
¬FT0010,0366¬GB0792,0000,0005¬FS
¬FT0264,0610¬GB0000,0244,0005¬FS
¬FT0010,0630¬GB0792,0000,0020¬FS
¬FT0010,0722¬GB0792,0000,0005¬FS
¬FT0010,0972¬GB0792,0000,0018¬FS
¬FT0670,0722¬GB0132,0098,0053¬FS
¬PQ0001,0,0001,Y¬FS
¬XZ

Alex

ZPL instruction ^B7
>
>
> I'm still getting page size errors on the printer
>
> -----Original Message-----
> From: Steiner, Webb H (TC) [mailto:whsteiner@taylorcorp.com]
> Sent: Tuesday, November 13, 2001 4:51 PM
> To: 'rpg400-l@midrange.com'
> Subject: RE: Barcoding - ZPL instruction ^B7
>
>
> I was trying to break down the data but I found documentation
> that requires
> - structure in one piece without row breaks and space
>
> I'm going to try 241 - I've changes the label printer from
> 5225 to 3812
>
> Have you done this?
>
>
>
> -----Original Message-----
> From: Alex A Moore [mailto:alexm@ellishosiery.com]
> Sent: Tuesday, November 13, 2001 4:05 PM
> To: rpg400-l@midrange.com
> Subject: RE: Barcoding - ZPL instruction ^B7
>
>
> How long is your printer file record defined?
>
> Alex
>
> >
> >
> > I need to know how to code the O specs for the PDF417
> > barcode. I have a data
> > element of 207 bytes. I have broken the data down into three
> > fields and am
> > spacing 0 before and 0 after on the except lines. Nothing
> > prints when I send
> > it to the Zebra printer. On examination - the hex dump is
> > showing carriage
> > returns are being inserted into the data causing the barcode
> > not to print.
> >
> > Someone must be using the 417. Please help.
> >
> >
> >                                             Webb
>