× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



We have a small network at home consisting of a broadband cable
connection. We have a Win2003 Server that hosts our website and acts as a
personal SFTP server and we also connect our laptops/desktops to the
network - all are statically assigned ip addresses. (All are networked
with a workgroup and dhcp is off on the server.) Tivo uses a dhcp assigned
address and occasionally we have a laptop user that connects via a dhcp
address too. Dhcp is managed by the router.

We've always used Linksys routers, starting with a wired BEFSR41 and now
use a wired BEFSR81. We later got a WAP54G access wireless access point
(wired to the BEFSR81) which our laptop/desktops use, but the server is
still hardwired directly to the router. We don't broadcast and we do use
WPA encryption, so I'm pretty sure the neighbors aren't stealing
bandwidth.

A few weeks ago the router got a bit flaky and as a result I attempted to
upgrade the firmware - and that failed. Long story short was that after a
day of being down we were assigned a new IP address by our ISP. And ever
since that time our website has been experiencing connection time outs.

Now to the heart of the matter: I'm curious as to whether the firmware
which I finally upgraded has affected our bandwidth capability. The new
firmware has what is called QOS and when that is enabled the website seems
to perform like it did before the upgrade, but then when we connect to the
office for telenet sessions, those connections seem to suffer.

I read a review of the router and the tech specs indicate a 1 x WAN Port
(10 BaseT Ethernet, RJ-45) and I wonder if that is limiting the web site,
but that doesn't explain (to me) why the QOS would provide better service.
(I'm not much of a network person so I'm learning as I go.)

So I'm beginning to wonder if I should investigate a better quality router
for home. Any ideas for suggestions for an upgrade path that isn't
terribly expensive?

Regards, Jerry

Gerald Kern - MIS Project Leader
Lotus Notes/Domino Administrator
IBM Certified RPG IV Developer
The Toledo Clinic, Inc.
4235 Secor Road
Toledo, OH 43623-4299
Phone 419-479-5535
gkern@xxxxxxxxxxxxxxxx


This e-mail message, including any attachments, is for the sole use of the
intended recipient(s) and may contain confidential and privileged
information. Any unauthorized use, disclosure or distribution is
prohibited. If you are not the intended recipient, please inform the
sender by reply e-mail and destroy this and all copies of this message.

As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.