× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Here's a link to an IBM web page that gives the details for the "manual" process:

https://www.ibm.com/support/pages/creating-afp-resources-using-ibm-afp-printer-drivers

Rich Loeber
Kisco Systems LLC
https://www.kisco.com

________________________________


On 6/23/2022 12:07 PM, Vern Hamberg via MIDRANGE-L wrote:
I think you basically have to do things by hand - IF you keep using overlays, anyhow. You have your AFP printer driver on Windows, "print" the image to a file, send that file to the IBM i somewhere, copy it into a source member, from which you create the overlay.

I suggest another option - I don't remember if it can replace overlays, but it can a lot - use the AFPRSC keyword in your PRTF source - you point directly at an image file in the IFS and it gets pulled in as AFP content.

It works fine for PAGSEGs. If your overlay is only on the front of a sheet, you might be able to use AFPSRC. If you specify the overlay in the PRTF create command, then, no, you need the overlay, probably.

Good luck!!
Vern

On 6/23/2022 10:41 AM, SReeves@xxxxxxxxxxxxxxxxxx<mailto:SReeves@xxxxxxxxxxxxxxxxxx> wrote:
So, each time I've had to deal with overlay files it seems there is a new
way to add them to system.

My admin recently updated to the newest navigator for i. Previous
instructions I had were to use the AFP Manger in navigator for i to upload
the overlay file. Digging through the new version I can't seem to locate
an AFP Manager. Was it removed or just more difficult to find? If it was
removed, is there some new function/process to add overlay files?

This page is dated just from November, but seems to give directions for
the old navigator for i.
https://www.ibm.com/support/pages/creating-afp-resources-using-ibm-afp-printer-drivers
I tried following the process on that page to ftp the file as a possible
alternative. However I always get "501 Unknown extension in database file
name" when trying to 'put' the file. I created the FILE(QGPL/AFPRES) just
as it suggests.
If anyone can point me how to get to the new AFP Manager I'd appreciate
it.

Thanks
Shane





As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.