That printer does not seem to support PJL which is what you have
configured.
See
https://www.ibm.com/support/pages/node/644553
I think you will need to configure for LPR using a remote writer.
This may assist in creating the output queue for the remote writer.
Don
From: "Gary Kuznitz" <docfxit@xxxxxxxxxxxx>
To: "Midrange Systems Technical Discussion"
<midrange-l@xxxxxxxxxxxxxxxxxx>
Date: 10/10/2021 07:53 AM
Subject: How to configure an HP printer on my LAN
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxxxxxxxx>
I would like to print from a P9 V7r4 to an HP8620 printer
on my network.
I've tried:
CRTDEVPRT DEVD(&DEVNAME) DEVCLS(*LAN)
TYPE(3812) +
MODEL(1) LANATTACH(*IP) PORT(9100) +
ATTACH(*DIRECT) ONLINE(*YES) FONT(011 +
*NONE) FORMFEED(*AUTOCUT) +
SEPDRAWER(*FILE) PRTERRMSG(*INQ) +
MSGQ(*CTLD) ACTTMR(170)
INACTTMR(*SEC15) +
LINESPEED(19200) WORDLEN(8)
PARITY(*NONE) +
STOPBITS(1) TRANSFORM(*YES) +
MFRTYPMDL(*HP5SI) PPRSRC1(*LETTER) +
PPRSRC2(*LETTER) ENVELOPE(*NUMBER10) +
ASCII899(*NO) IMGCFG(*NONE) +
CHRID(*SYSVAL) +
RMTLOCNAME('192.168.168.27') +
USRDFNOPT(*IBMSHRCNN) +
SYSDRVPGM(*IBMSNMPDRV)
PUBLISHINF(*DUPLEX +
*COLOR *UNKNOWN *UNKNOWN *BLANK
*UNKNOWN) +
TEXT('HP8620 ')
Then I WRKWTR Go to outq press 2 to change
enter options below:
CRTOUTQ OUTQ(QUSRSYS/HP86202)
RMTSYS(*INTNETADR) +
RMTPRTQ(PASS) AUTOSTRWTR(1)
CNNTYPE(*IP) +
DESTTYPE(*OTHER) MFRTYPMDL(*HP4) +
INTNETADR('192.168.168.27') SEPPAGE(*NO)
I'm getting an error saying:
Message ID . . . . . . : CPA405C Severity . . . . . . . :
99
Message type . . . . . : Inquiry
Date sent . . . . . . : 10/09/21 Time sent . . . . . . :
14:43:56
Message . . . . : An input tray needs attention on device
HP86202 (C R).
Cause . . . . . : An error was detected on device
HP86202. This may have
been caused by something like an input tray missing or
an input tray empty.
Look at the printer to determine the cause of the
problem.
Possible choices for replying to message . . . . . . . . . . . .
. . . :
C -- Enter C to cancel the writer.
R -- Enter R to continue printing the file after the
problem at the printer
has been corrected.
Does anyone know how to configure an HP inkjet printer?
Thanks,
Gary Kuznitz
midrange.com
