Re: How to configure an HP printer on my LAN

["Larry \"DrFranken\" Bolhuis" <midrange@xxxxxxxxxxxx>]

Have you looked here:
https://www.ibm.com/support/pages/information-printers-hp

	- L

On 10/9/2021 5:53 PM, Gary Kuznitz wrote:
> I would like to print from a P9 V7r4 to an HP8620 printer
> on my network.
>
> I've tried:
> CRTDEVPRT  DEVD(&DEVNAME) DEVCLS(*LAN)
> TYPE(3812) +
>               MODEL(1) LANATTACH(*IP) PORT(9100) +
>               ATTACH(*DIRECT) ONLINE(*YES) FONT(011 +
>               *NONE) FORMFEED(*AUTOCUT) +
>               SEPDRAWER(*FILE) PRTERRMSG(*INQ) +
>               MSGQ(*CTLD) ACTTMR(170)
> INACTTMR(*SEC15) +
>               LINESPEED(19200) WORDLEN(8)
> PARITY(*NONE) +
>               STOPBITS(1) TRANSFORM(*YES) +
>               MFRTYPMDL(*HP5SI) PPRSRC1(*LETTER) +
>               PPRSRC2(*LETTER) ENVELOPE(*NUMBER10) +
>               ASCII899(*NO) IMGCFG(*NONE) +
>               CHRID(*SYSVAL) +
>               RMTLOCNAME('192.168.168.27') +
>               USRDFNOPT(*IBMSHRCNN) +
>               SYSDRVPGM(*IBMSNMPDRV)
> PUBLISHINF(*DUPLEX +
>               *COLOR *UNKNOWN *UNKNOWN *BLANK
> *UNKNOWN) +
>               TEXT('HP8620 ')
>
> Then I WRKWTR  Go to outq press 2 to change
>          enter options below:
> CRTOUTQ    OUTQ(QUSRSYS/HP86202)
> RMTSYS(*INTNETADR) +
>               RMTPRTQ(PASS) AUTOSTRWTR(1)
> CNNTYPE(*IP) +
>               DESTTYPE(*OTHER) MFRTYPMDL(*HP4) +
>               INTNETADR('192.168.168.27') SEPPAGE(*NO)
>
> I'm getting an error saying:
> Message ID . . . . . . :   CPA405C       Severity . . . . . . . :
> 99
> Message type . . . . . :   Inquiry
> Date sent  . . . . . . :   10/09/21      Time sent  . . . . . . :
> 14:43:56
>                                                                                
> Message . . . . :   An input tray needs attention on device
> HP86202 (C R).
> Cause . . . . . :   An error was detected on device
> HP86202.  This may have
>    been caused by something like an input tray missing or
> an input tray empty.
>    Look at the printer to determine the cause of the
> problem.
> Possible choices for replying to message . . . . . . . . . . . .
> . . . :
>    C -- Enter C to cancel the writer.
>    R -- Enter R to continue printing the file after the
> problem at the printer
>      has been corrected.
>                                                                                
> Does anyone know how to configure an HP inkjet printer?
>
> Thanks,
>
> Gary Kuznitz