Only 1 partition on the Power 6 box.
On a Power 9, I have guests and hosts. Obviously the host MUST be up and running for the guest to come up since the host has the NWS storage ....
Very Respectfully,
Michael Mayer
IBM i on Power System Admin.
IT Operations.
The Florida Bar
651 E. Jefferson St
Tallahassee, Florida 32399-2300
mmayer@xxxxxxxxxxxxxx
https://www.floridabar.org
Office: 850.561.5761
Cell: 518.641.8906
Please note: Florida has very broad public records laws. Many written communications to or from The Florida Bar regarding Bar business may be considered public records, which must be made available to anyone upon request. Your e-mail communications may therefore be subject to public disclosure.
3. RE: Power 6 8203-E4A (Rob Berendt)
----------------------------------------------------------------------
------------------------------
message: 3
date: Mon, 30 Aug 2021 19:42:15 +0000
from: Rob Berendt <rob@xxxxxxxxx>
subject: RE: Power 6 8203-E4A
Does it matter what order you bring the partitions up? On our systems it is critical. For example we bring up the vios lpars first since they virtualize Ethernet.
Then we have to bring up the lpar which hosts the disk drives to the other partitions. Otherwise I can easily see how one could get a missing load source error.
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail to: 7310 Innovation Blvd, Suite 104
Ft. Wayne, IN 46818
Ship to: 7310 Innovation Blvd, Dock 9C
Ft. Wayne, IN 46818
http://www.dekko.com
-----Original Message-----
From: MIDRANGE-L <midrange-l-bounces@xxxxxxxxxxxxxxxxxx> On Behalf Of Mayer, Michael via MIDRANGE-L
Sent: Monday, August 30, 2021 3:23 PM
To: midrange-l@xxxxxxxxxxxxxxxxxx
Cc: Mayer, Michael <MMayer@xxxxxxxxxxxxxx>
Subject: Power 6 8203-E4A
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
Hey guys, it's rare I reach out for help but ...
I have an old Power 6 8203-E4A with a V7R1 partition on it.
I completed a full system save on it and my network guys wanted to power it completely down to move it from 1 UPS to another.
Mission accomplished EXCEPT ...
The managed server comes up fine. The V7R1 partition is stuck at the B2004158 - load source cannot be found error.
We've tried everything you can think of to get this thing back. It shares a tape resource with a V7R2 partition that is a guest on a Power 9 partition.
I acquired this set up.
Any idea's on how to get the V7R1 on the Power 6 running? I've googled it from 1 end to the other. Not quite sure any of what I've located Will work for this?
Any and all contributions gratefully accepted.
Very Respectfully,
Michael Mayer
IBM i on Power System Admin.
IT Operations.
The Florida Bar
Tallahassee, Florida 32399-2300
mmayer@xxxxxxxxxxxxxx
https://www.floridabar.org
Office: 850.561.5761
Cell: 518.641.8906
________________________________
Please note: Florida has very broad public records laws. Many written communications to or from The Florida Bar regarding Bar business may be considered public records, which must be made available to anyone upon request. Your e-mail communications may therefore be subject to public disclosure.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit:
https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives
at
https://archive.midrange.com/midrange-l.
Please contact support@xxxxxxxxxxxxxxxxxxxx for any subscription related questions.
Help support midrange.com by shopping at amazon.com with our affiliate link:
https://amazon.midrange.com
------------------------------
Subject: Digest Footer
midrange.com
