RE: HMC upgrade: Stuck at "localhost login:"

Rob
The lack of the Critical Console Data should not be the end of the world.

As long as you know the IP range for your servers FSP's you can scratch
install the HMC and once you define the private network and connect to the
Power systems your current lpar profile settings will be imported via the
hypervisor (at least that is the way I remember it going - admittedly on a
physical HMC).

If you don't know the ip range then get someone to attend site and perform
a function code 30 to get the FSP IP address

Have fallen into the trap of the login screen issue a couple of times on
the V8 code stream and a scratch install was required

Your key issue will be defined users and re doing all the "soft
operational settings" - but that is only work. ..........

Hate to say it with 40/40 hindsight - time for a second HMC VM?

Shaun

   
Shaun Ryan
Systems Administrator SAP Basis
[1][USEMAP] [2]P: +64 3 363 6939
[3]M: +64 21 974 587
[4]E: Shaun.Ryan@xxxxxxxxxxxxxxxxxxx
[5]167 Main North Road, Christchurch 8140

-----Original Message-----
From: Rob Berendt <rob@xxxxxxxxx>
Sent: Tuesday, 8 June 2021 5:39 am
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxxxxxxxx>
Subject: RE: HMC upgrade: Stuck at "localhost login:"

Duty manager finally got someone to call me back.
I had downloaded from the ibm site to a directory on IBM i. Then I used
the get upgrade from the hmc to the IBM i site. Even though the byte size
is exact the support guy says my download must be corrupt and that is what
he sees (or guesses) is the issue each time this happens. He has no clue
how to do a checksum on either IBM i, nor on the HMC after the get
upgrade.
He had me use vmware to restart the session and it hung again on the log
in.

He says I'm <expletive deleted>. He suggests that I download the new
version of HMC directly and scratch install.
Of course the steps had me run a save upgrade data but not a Backup
Critical Console data so guess what I do not have.

Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail
to: 7310 Innovation Blvd, Suite 104
Ft. Wayne, IN 46818
Ship to: 7310 Innovation Blvd, Dock 9C
Ft. Wayne, IN 46818
[6]http://www.dekko.com

-----Original Message-----
From: MIDRANGE-L <midrange-l-bounces@xxxxxxxxxxxxxxxxxx> On Behalf Of Rob
Berendt
Sent: Monday, June 7, 2021 9:03 AM
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxxxxxxxx>
Subject: HMC upgrade: Stuck at "localhost login:"

I am upgrading my vHMC following the steps at:
[7]https://www.ibm.com/support/pages/node/6372280
I have ran the step: hmcshutdown -t now -r
It started the reboot. It's been sitting at a screen displaying the
following for quite some time now:
IBM Linux 9 (hmc9_0p)
Kernel 4.18.0-193.14.3.el8.im.1.x86_64 on an x86_64
localhost login:
I tried logging in as hscroot. It did not like that. Then it erased the
screen and redisplayed the above.
What do I do?

I have a case opened with IBM on this. However they never get back to you
on the same day regarding HMC issues until you bring the duty manager on
the line. Once it's been here for two hours I will try that route.

Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1
Group Dekko
Dept 1600
Mail to: 7310 Innovation Blvd, Suite 104
Ft. Wayne, IN 46818
Ship to: 7310 Innovation Blvd, Dock 9C
Ft. Wayne, IN 46818
[8]http://www.dekko.com

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: [9]https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives
at [10]https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxxxxxxxxxx for any subscription related
questions.

Help support midrange.com by shopping at amazon.com with our affiliate
link: [11]https://amazon.midrange.com

------------------------------------------------------------------------------------------------------------------------
Note:
This e-mail message has been inspected for malicious content.

Attention:
The information contained in this message and or attachments is intended
only for the person
or entity to which it is addressed and may contain confidential and/or
privileged material. Any
review, retransmission, dissemination or other use of, or taking of any
action in reliance upon,
this information by persons or entities other than the intended recipient
is prohibited. If you
received this in error, please contact the sender and delete the material
from any system and
destroy any copies.
Please note that the views and opinions expressed in this message may be
those of the
individual and not necessarily those of Foodstuffs South Island Ltd.

Thank you.
------------------------------------------------------------------------------------------------------------------------

References

Visible links
1. file:///tmp/tmpgx_oYN.html#fssilink
2. file:///tmp/tel:+64 3 363 6939
3. file:///tmp/tel:+64 21 974 587
4. mailto:Shaun.Ryan@xxxxxxxxxxxxxxxxxxx
5. https://www.google.co.nz/maps/place/Foodstuffs+South+Island+Limited/@-43.4860111,172.6155373,15.45z/data=!4m5!3m4!1s0x0:0x83f21f1bdb963e47!8m2!3d-43.4863573!4d172.6152563
6. http://www.dekko.com/
7. https://www.ibm.com/support/pages/node/6372280
8. http://www.dekko.com/
9. https://lists.midrange.com/mailman/listinfo/midrange-l
10. https://archive.midrange.com/midrange-l.
11. https://amazon.midrange.com/