Re: GO SAVE 21 CPF3777

Afternoon,

Hi Patrik and Luis

So, having taken both your advice the file that will not save is:

QSYS2/SYSROUTINE

Patrik, I don't have any PTF's installed,

This box was clean installed at V5R4M0, i do not have access to download the PTF's

Could I do: RSTLICPGM OPTION(01) and give it the relevant install CD?

Although of hand I'm not sure which one that is I would need to work it out.

Luis do you have any suggestions ?.

Restoring from my last SAV21 is not an option as the tape drive I was using for that died and is a
different medium

Thanks
Chris
________________________________
From: Christopher J. Wager | 56K Projects
Sent: 24 October 2020 09:46
To: midrange-l@xxxxxxxxxxxxxxxxxx <midrange-l@xxxxxxxxxxxxxxxxxx>
Subject: Re: GO SAVE 21 CPF3777

Morning all,

Thank you for the advice, so far I have narrowed this down to a problem with the QSYS2 - library one object not saved but I can’t seem to work out how to determine which object.

chkobjdmg does not seem to be a valid command on V5R4, any idea how I determine the exact file that is the issue.

Alternatively can someone tell me if it’s Is possible to restore the entire QSYS2 library from the install CD’s without nuking the box and starting again.

If so how would I do that.

Thanks
Chris

Sent from my iPhone

On 23 Oct 2020, at 01:15, Christopher J. Wager | 56K Projects <cwager@xxxxxxxxxxxxxxx> wrote:


Evening All,

Seem to have a problem when I run a go save, option 21 I am getting the following:

Display Program Messages

Job 004755/QSECOFR/DSP01 started on 10/22/20 at 23:08:50 in subsystem QCTL i
CPF3777 received during SAVLIB command. (C G)
C
CPF3777 received during SAVLIB command. (C G)
G
Receiver QASOSC0001 in QUSRSYS never fully saved. (I C)
I
CPF3777 received during SAVLIB command. (C G)
C
CPF3777 received during SAVLIB command. (C G)

If I respond G it carried on but says "Error Occurred with this option" at the end.

Any of you more knowledgeable folks got any idea's.

Thanks