Re: My Operation Console has failed.

Hi Darryl

its been a while since I used Ops Console, but it's not my recollection
that it attached to a "normal" line description.
You don't provide any information regarding what version of OS you are on
or what client you are using to access Ops Console.
I would recommend the Access Client Solution as I found it to be a bit more
useful especially if there was a problem.
You also don't describe when or how the problem is occurring - have you
IPL'ed and it still didn't come up ? Did you have a console while the IPL
was running but it failed afterwards ?

The "Line description" for Ops console is visible in DST IIRC so you might
need to reset it there.

You could look and see if DSP01 or whatever the console is called has
failed and try varying off the device description or deleting it and
letting it be recreated when you start the console session.


On Mon, Aug 3, 2020 at 8:30 AM a4g atl <a4ginatl2@xxxxxxxxx> wrote:

I am trying to get my Ops COnsole to work again. I found my ehterline line,
controller and device description were failing.

I want to recreate the line, controller and device but cannot find any
information on this at IBM or Google. What I have found is the part
configuring the PC, which I do not have a problem with.

Can anyone assist with what the line configuration should look like?

TIA

Darryl Freinkel.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives
at https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxxxxxxxxxx for any subscription related
questions.

Help support midrange.com by shopping at amazon.com with our affiliate
link: https://amazon.midrange.com