× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.




There is no reason why a key pair can't work with multiple vendors, or
for different users if you have it loaded correctly, and based on the
steps you took, you appear to have it set up correctly on your side. It
is up to the server operator to see what is going wrong now.




Kevin Bucknum
Senior Programmer Analyst
MEDDATA/MEDTRON
Tel: 985-893-2550

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf
Of Adams, Jay
Sent: Thursday, May 10, 2018 8:33 AM
To: midrange-l@xxxxxxxxxxxx
Subject: RE: Setting Up sFTP for a Second Vendor - Host key

Thanks to both Kevins for responding and thanks for being patient with
me. I
am learning a lot going through this process.

You asked if I had sent them my public key. Yes. And just to be sure I
did this
correctly I will explain how I did it.
Several months ago I set up sFTP with another vendor.
At that time, I created my public and private ssh keys and put them
under
user BLUSER in directory /home/BLUSER/.ssh.
I assumed those ssh keys could be used for any vendor, so I copied
them
(id_rsa and id_rsa.pub) to /home/CCUSER/.ssh.
I emailed the id_rsa.pub key to the new vendor and they said they put
it on
their keyring.
The public key I created for the previous vendor can also be used for
this
new vendor, right?

------------------------------

message: 3
date: Wed, 9 May 2018 07:21:01 -0500
from: "Kevin Bucknum" <Kevin@xxxxxxxxxxxxxxxxxxx>
subject: RE: Setting Up sFTP for a Second Vendor - Host key

The lines you are highlighting indicate that it connected, and that
you trust
that st.concursolutions.com are who they say they are (you have
trusted
their host key). After that I moves on to proving that you are who you
say
you are. It says that it can take passwords or public keys.
Your side offers the id_rsa public key, and the other side immediately
comes
back and asks again for something different. That means that the issue
is on
the other side now. They either don't have your public key loaded (
you did
give it to them correct? ) or they have some other config issue on
that side.
You could try and connect with two v's sftp -vv and see if the extra
debug
gives some more information, but most likely someone at
concursolutions.com will have to look at their logs and config and see
what is
happening.

As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.