Re: WRKDSKSTS and finding true disk space usage

[DrFranken <midrange@xxxxxxxxxxxx>]

So having seen your WRKDSKSTS and WRKSYSSTS snaps and then going back to 
this math right from the start you get a #FAIL in math. 11 x 127 is 1397 
not 1268 and the entire conversation was based on it! Oops!! In addition 
you added in the capacity of the hot spare drive for some unknown reason.

Now before I doff my Bus Driver cap and start leaving tire tracks, 
perhaps a lesson.

You actually have 139GB drives which we know from the Type of 59FD. With 
IBM i the drive size that appears in WRKDSKSTS is the AVAILABLE size 
after RAID loss is subtracted. So the 126835MB is the effective capacity 
when there is one RAID-5 set of 11 drives. The hot spare drive does not 
appear in WRKDSKTS when properly configured (as yours is) and does not 
count in the available capacity.

If you had 8 of these drives in a single RAID set then they would appear 
with 121GB of capacity each.

So it's really understanding of how RAID works on IBM i and providing 
the correct information up front to help get correct answers!


        - Larry "DrFranken" Bolhuis

www.Frankeni.com
www.iDevCloud.com - Personal Development IBM i timeshare service.
www.iInTheCloud.com - Commercial IBM i Cloud Hosting.

On 5/3/2018 2:48 PM, Matt Olson wrote:
> Does anyone know why WRKDSKSTS shows total ASP size as 1395GB when it should really be around 1268?
>
> We have 11 x 127GB drives in RAID 5 which should equal about 1268. We also have one hot spare, bringing it to 1395.
>
> Why would WRKDSKSTS show the hotspare as usable drive space??
>
> Additionally, the percentage ASP used is off as well because of this.
>
> Lastly, does the system incorrectly calculate total used disk space because of the recursive sym link in QOpenSYs that links back upon itself up to a depth of 10 times (therefore inflating QOpenSys consumed space by 10x)?
>
> Thanks!