Re: WRKDSKSTS and finding true disk space usage

[DrFranken <midrange@xxxxxxxxxxxx>]

*WARNING**

The hotspare should NOT BE LISTED in WRKDSKSTS. If it's showing there 
and has an ASP number next to it you are UNPROTECTED!!

Hit F11 to see protection. If there is nothing under 'Protection" then 
you need to remove this disk from the ASP IMMEDIATELY! Your hot spare is 
set incorrectly as an available disk not a Hot Spare in this case!!

        - Larry "DrFranken" Bolhuis

www.Frankeni.com
www.iDevCloud.com - Personal Development IBM i timeshare service.
www.iInTheCloud.com - Commercial IBM i Cloud Hosting.

On 5/3/2018 2:48 PM, Matt Olson wrote:
> Does anyone know why WRKDSKSTS shows total ASP size as 1395GB when it should really be around 1268?
>
> We have 11 x 127GB drives in RAID 5 which should equal about 1268. We also have one hot spare, bringing it to 1395.
>
> Why would WRKDSKSTS show the hotspare as usable drive space??
>
> Additionally, the percentage ASP used is off as well because of this.
>
> Lastly, does the system incorrectly calculate total used disk space because of the recursive sym link in QOpenSYs that links back upon itself up to a depth of 10 times (therefore inflating QOpenSys consumed space by 10x)?
>
> Thanks!