RE: No system console and TCP/IP down

Thanks for confirming that Chris.

So back to the question...

When the function 2 is set to manual mode= 'M', why does the control panel not show function 3?



-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Chris Bipes
Sent: Wednesday, January 20, 2016 12:10 PM
To: 'Midrange Systems Technical Discussion' <midrange-l@xxxxxxxxxxxx>
Subject: RE: No system console and TCP/IP down

No a 710 does not have a key. You can stop looking for the key.


Chris Bipes
Director of Information Services
CrossCheck, Inc.


-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Hopkins, William
Sent: Wednesday, January 20, 2016 8:59 AM
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Subject: RE: No system console and TCP/IP down

Thanks Chris

I just read this in the document provided yesterday.

1. If your system uses a keystick, insert it in the key slot.
So I used those terms.
2. Place the system into manual mode by using the system's control panel.

I do not think there is one on the IBMi Power 710 Express.

But when I changed function 2 to be manual = "M" and the function 3 did not become available.

I started thinking there might be one I am not seeing and it was not allowing the change to go through without one.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related questions.