There are exit points that you can load a program into to control FTP - I wrote a firewall program to protect my test environment from accidentally going out to the real world.
Look up QIBM_QTMF_CLIENT_REQ, QIBM_QTMF_SERVER_REQ and QIBM_QMTF_SVR_LOGON.
The LOGON exit point controls being able to log in via FTP, the others can control what activity actually occurs.
Hope this helps.
James P. Wiant
Test System Administrator
NORTH ISLAND LIMITED
DD: 09 621 0774 | M: 027 463 4159| P: 09 621 0600
DX Box CX 15021 or PO Box 27480 Mount Roskill, Auckland 1440, New Zealand
Fast is fine. Accuracy is everything
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of CRPence
Sent: Tuesday, 29 September 2015 13:39
Subject: Re: turning off FTP command
On 28-Sep-2015 15:59 -0600, tim wrote:
Is there a way to turn off the FTP command from the iseries. I turned
off the tcp/ip ftp server via system i navigator, but I'm still able
to FTP from the iseries.
Not sure of the full requirements, from what is alluded. There is control available for the IBM i FTP Client, beyond the authority to the Start TCP/IP File Transfer Protocol (STRTCPFTP), but authority is at least a start. Probably worth a review of the replies in the thread subject "FTP outbound"