An additional note on the ptfs - the doc of recommended fixes, some
recommended such as
SI53679 are product 5770SS1 (not all are 5770TS1 ptfs) - look in the
description column for "i5/OS PDF Transform Services"
Jim Franz
-----Original Message-----
From: midrange [mailto:franz9000@xxxxxxxxx]
Sent: Wednesday, August 12, 2015 9:37 PM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Creating PDF instead of a spool file
Dean,
This page - Recommended Fixes for Print for 7.1
http://www-01.ibm.com/support/docview.wss?uid=nas1fc479ff051ff98378625779000
6380e3
lists several 5770TS1 fixes since the function released.
Also, I have seen many instances where IBM transform functions do odd things
when the page size is odd - 13.19 ... try 14.0 x 11 on your printer file
(and verify ptfs) and see if same results.
Jim Franz
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
rob@xxxxxxxxx
Sent: Wednesday, August 12, 2015 8:30 AM
To: Midrange Systems Technical Discussion
Subject: Re: Creating PDF instead of a spool file
Interesting. I would not have expected the difference.
HTH:
http://www-01.ibm.com/support/knowledgecenter/ssw_ibm_i_72/rzalu/rzaluwscstp
ara.htm?lang=en-us
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail
to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com
From: Dean Eshleman <Dean.Eshleman@xxxxxxxxxxxx>
To: Midrange-L Mailing list xxxx <midrange-l@xxxxxxxxxxxx>
Date: 08/11/2015 05:18 PM
Subject: Creating PDF instead of a spool file
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>
Hi,
This is my first attempt at creating a PDF directly from an IBM i spool
file. I first ran my process to create the spool file like normal and then
I used the CPYSPLF command to create the PDF on the IFS. When I did this,
the PDF was created using the CourierStd font and it filled the page. The
page size was 13.19 x 11.0 in. It looked good. So, I used the OVRPRTF
command to direct the report directly to a PDF. When I did this, it used
ArialMT and TimesNewRomanPSMT. The page size was 14 x 11 and the text only
filled 3.6 inches of the page width. It looks tiny on the page.
So, how do you control the font and font size that it uses to create the
PDF? Do the properties of the printer file control anything?
Dean Eshleman
Software Development Architect
Everence Financial
1110 North Main Street
PO Box 483
Goshen, IN 46527
Phone: (574) 533-9515 x3528
www.everence.com<
http://www.everence.com/>
______________________________________________________________________
Confidentiality Notice: This information is intended only for the individual
or entity named. If you are not the intended recipient, do not use or
disclose this information. If you received this e-mail in error, please
delete or otherwise destroy it and contact us at (800) 348-7468 so we can
take steps to avoid such transmission errors in the future. Thank you.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at
http://archive.midrange.com/midrange-l.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at
http://archive.midrange.com/midrange-l.
midrange.com
