× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Dean,

This page - Recommended Fixes for Print for 7.1
http://www-01.ibm.com/support/docview.wss?uid=nas1fc479ff051ff98378625779000
6380e3
lists several 5770TS1 fixes since the function released.

Also, I have seen many instances where IBM transform functions do odd things
when the page size is odd - 13.19 ... try 14.0 x 11 on your printer file
(and verify ptfs) and see if same results.

Jim Franz

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
rob@xxxxxxxxx
Sent: Wednesday, August 12, 2015 8:30 AM
To: Midrange Systems Technical Discussion
Subject: Re: Creating PDF instead of a spool file

Interesting. I would not have expected the difference.
HTH:
http://www-01.ibm.com/support/knowledgecenter/ssw_ibm_i_72/rzalu/rzaluwscstp
ara.htm?lang=en-us


Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail
to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





From: Dean Eshleman <Dean.Eshleman@xxxxxxxxxxxx>
To: Midrange-L Mailing list xxxx <midrange-l@xxxxxxxxxxxx>
Date: 08/11/2015 05:18 PM
Subject: Creating PDF instead of a spool file
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>



Hi,

This is my first attempt at creating a PDF directly from an IBM i spool
file. I first ran my process to create the spool file like normal and
then I used the CPYSPLF command to create the PDF on the IFS. When I did
this, the PDF was created using the CourierStd font and it filled the
page. The page size was 13.19 x 11.0 in. It looked good. So, I used the
OVRPRTF command to direct the report directly to a PDF. When I did this,
it used ArialMT and TimesNewRomanPSMT. The page size was 14 x 11 and the
text only filled 3.6 inches of the page width. It looks tiny on the page.

So, how do you control the font and font size that it uses to create the
PDF? Do the properties of the printer file control anything?

Dean Eshleman
Software Development Architect

Everence Financial
1110 North Main Street
PO Box 483
Goshen, IN 46527
Phone: (574) 533-9515 x3528
www.everence.com<http://www.everence.com/>

______________________________________________________________________
Confidentiality Notice: This information is intended only for the
individual or entity named. If you are not the intended recipient, do not
use or disclose this information. If you received this e-mail in error,
please delete or otherwise destroy it and contact us at (800) 348-7468 so
we can take steps to avoid such transmission errors in the future. Thank
you.

As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.