× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



FYI, I've seen tape devices not report in.
There were recent PTFs to resolve this issue.

Paul

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Brian Piotrowski
Sent: Wednesday, November 26, 2014 1:35 PM
To: Midrange Systems Technical Discussion
Subject: RE: Tape Drive not Detected

Sorry, all.....my fault.

The 2749 WAS the card that was in the machine. I pulled it out and replaced it with a 571A as Roberto has indicated.

Pete - I am running v6r1 on this box.

/b;

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Roberto José Etcheverry Romero
Sent: Wednesday, November 26, 2014 12:52 PM
To: Midrange Systems Technical Discussion
Subject: Re: Tape Drive not Detected

Just to start, you might have fried the LTO4 drive. The 2749 is an HVD controller not an LVD one. Mixing HVD with LVD never ends well... And wait, the 2749 does NOT have 2 ports, it's a single port HVD controller...
weird...
You need either a 5702 or 571A controller to drive the LTO4, of course you have to hang that IOA under an IOP for LTO usage. Read the PCI/PCI-X placement rules redbook for locations and requirements on building a config for the 810.

Best Regards,

Roberto


On Wed, Nov 26, 2014 at 2:42 PM, Brian Piotrowski < bpiotrowski@xxxxxxxxxxxxxxx> wrote:

Hi All,

I'm having an issue with connecting a tape drive to our iSeries box.
The box is a 9406-810 (yes, yes I know it's old, but I need to back it
up and restore it to the new server). The tape drive I have is a
3580-L43 single tape drive SCSI ID 0. The card I installed in the 810
is a 2749 which has two ports - SCSI ID 0, SCSI ID 1. I originally
removed this card from an
i520 box and installed it in slot C02 on the 810. I connected the LVD
cable from the LTO drive to SCSI PORT ID 1 on the interface card.
When I IPLed the system I would normally expect to see the tape drive
there when I do a WRKDEVD *TAP. However, there are no tape drives
present which would lead me to believe it might be misconfigured or I am missing something.

Anyone have any ideas where I should start? I went into SST and
looked under packaging resources and there are two tape units listed
there, but neither of them are the model that I have (they are listed
as 3580-003 and
3580-001 - checking the serial number on both shows neither of them
are the device I am trying to set up).

Looking into the failed and non-reporting logical hardware resources I
see these items:
Description Type-model Status Resource Name
Storage IOA ? 5702-001 Unknown DC04
Storage IOA ? 2749-001 Unknown DC03
Tape Unit ? 3580-003 Unknown TAP03
Tape Unit ? 3580-001 Unknown TAP04

I'm a bit stuck on how to proceed....what are my next steps to try and
get this resolved so I can get the LTO operational?

Thankee-sai!

/b;

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Brian Piotrowski
Manager - I.T.
Simcoe Parts Service, Inc.
Ph: 705-435-7814 x5995
Fx: 705-435-5029
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
http://www.simcoeparts.com<http://www.simcoeparts.com/>

Please consider the environment. Don't print this e-mail unless you
really need to.

The information contained in this communication is confidential and
intended only for the use of those to whom it is addressed. If you
have received this communication in error, please notify me by
telephone (collect if necessary) and delete or destroy any copies of it. Thank you!

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take
a moment to review the archives at
http://archive.midrange.com/midrange-l.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.5577 / Virus Database: 4223/8629 - Release Date: 11/25/14
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.


As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.