× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Kevin,

The most likely cause is the LAN console device was disabled due to multiple
rejected attempts to connect. (The user profile might also be disabled)
The hard boot resets the device and when it comes up into LIC (C600xxxx)
then it will connect.

Keep in mind we are discussing devices and profiles that are in DST/SST
(down in the LIC) not at the IBM i level.

V7R1 will allow a sufficiently high authority DST/SST profile to sign on and
re-enable the device and profile. That might be easier than the (65+21)
routine, which on the worst day is a real pain making the day less
better......(guaranteed to be messed up at least three times every time you
try it, and every time it's messed up, start over)

One other thought, check the console device in IBM i, and make sure it's set
to vary on at IPL. I know it's a long shot but I have seen it set the other
way..

--
Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Kevin
Passey
Sent: Friday, November 07, 2014 3:48 AM
To: midrange-l@xxxxxxxxxxxx
Subject: Re: Lan Console will not fire up

Thanks Ted...

Any idea what causes this..it's been working fine for a while - then it
would only fire up after a hard re-boot.

Now it won't fire up at all..

Thanks again..

Kevin

date: Thu, 6 Nov 2014 17:17:55 +0000
from: Ted Breedon <tbreedon@xxxxxxxxxxx>
subject: RE; Lan Console will not fire up

This can be a pain, I wonder why IBM couldn't have included this
functionality in the ASMI but anyway you need to follow this procedure,

http://www-01.ibm.com/support/knowledgecenter/ssw_i5_54/rzajr/rzajrfunctions
6521.htm?cp=ssw_i5_54%2F1-1-1-1-3-4-4-4


message: 8
date: Thu, 06 Nov 2014 17:12:21 +0000
from: Kevin Passey <kevin@xxxxxxxxxxxxxxxxx>
subject: Lan Console will not fire up

Hi,

I have a LAN console plugged into an 8203-E4A at 7.1..

It works OK until we re-boot the system then the console will not come up on
the PC.....I also cannot ping the adapter..

Only a power off - then a restart will fire up the card..

What have I missed...

Thanks

Kevin
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at http://archive.midrange.com/midrange-l.



As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.