× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Not so fast! You CAN Hook a blade to an HMC now with 7.7.6 or newer HMC Code.

- Larry "DrFranken" Bolhuis

www.frankeni.com
www.iDevCloud.com
www.iInTheCloud.com

On 7/22/2013 3:05 PM, Roberto José Etcheverry Romero wrote:

Rob beat me to it. But yes, ALL power5 and up machines (except Blades, of
course) can be connected to an HMC. You MIGHT have a not optimal situation
if the HMC is at 7.7.x but it's not Unsupported, just not optimal (Power5
only HMC's should stay at 7.3.5.xx IIRC).
Best Regards,
Roberto

On Mon, Jul 22, 2013 at 4:00 PM, <rob@xxxxxxxxx> wrote:

You might want to read the topic "Cabling a model 9406-520, 9406-525, or
9407-515 and the Hardware Management Console (HMC)"
at
http://pic.dhe.ibm.com/infocenter/powersys/v3r1m5/topic/iphah_p5/e520.htm

And tell whomever said that it wasn't possible to RTFM.

Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1
Group Dekko
Dept 1600
Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





From: "optional info0rmation" <ldwopt@xxxxxxx>
To: "'Midrange Systems Technical Discussion'"
<midrange-l@xxxxxxxxxxxx>,
Date: 07/22/2013 02:44 PM
Subject: HMC question
Sent by: midrange-l-bounces@xxxxxxxxxxxx



I am back with another question about a 9406 520



It is 9406 520 Feature code 7734. We were told that an HMC cannot hook up
to
this system.



Is that statement true?



If it can be is there anything special that has to be done?



Thanks

Dave Willenborg

FNTS

Omaha NE



--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.



As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.