× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



With no disk drives I believe you just purchased a boat anchor or a good target practice item.

Paul Fenstermacher | Sys Admin, Sr | Corporate Systems - POWER Systems
Administration | Jack Henry & Associates, Inc.
663 West Highway 60 | Monett, MO 65708 | 417-235-6652 x177389 |
pfenstermacher@xxxxxxxxxxxxx

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Camiel Vanderhoeven
Sent: Thursday, July 18, 2013 12:43 PM
To: midrange-l@xxxxxxxxxxxx
Subject: Getting started with an AS/400 (9406 model 720)

Hello everyone,

I have just joined this list, so I'll quickly introduce myself first: I'm Camiel Vanderhoeven from the Netherlands, 35 years old, and I've been collecting old computers for a while. My focus is mainly on DEC equipment, but I had an opportunity to put my hands on an AS/400 for next to nothing last week.

Problem is, I don't know a lot about IBM stuff, and it seems there's a bit of a learning curve ahead of me.

My system is a 9406-720, with the following cards installed:

Left side:
CPU: FN243A
C01: 2838 ethernet card
C03: 2809 IOP
C05: 2721 2-line WAN
C09: 2720 WAN + Twinax
C10: 2722 Twinax
C11: 2740 disk controller

Right side:
E15: 2824 IOP
E16: 2740 disk controller

In the front there's a cd-rom drive, a tapedrive (SLR60), 20 slots for disks, and 20 empty disk sleds (types 6607 and 6713). The disks were removed before the auction :-(

I've also got a modem (IBM Options, V34), a serial cable to connect the modem, and two cables with breakout boxes (1 for the 2720 with 4 twinax connectors, and 1 for the 2722 with 8 twinax connectors)

So, where do I get started? I'd like to get something running on the machine. I might be able to obtain installation media for OS/400, but I'll need to be able to interface with the system.

Am I correct in assuming that I need to connect a terminal to act as the console, and that I issue boot commands from that console? Does said console terminal need to be connected through Twinax? What models of terminals should I look for, and what additional cables would I need to hook one up?
Can I use an ordinary serial terminal (VT100-like) as the console?

Any help would be very much appreciated.

Thanks,

Camiel.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.

NOTICE: This electronic mail message and any files transmitted with it are intended
exclusively for the individual or entity to which it is addressed. The message,
together with any attachment, may contain confidential and/or privileged information.
Any unauthorized review, use, printing, saving, copying, disclosure or distribution
is strictly prohibited. If you have received this message in error, please
immediately advise the sender by reply email and delete all copies.


As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.