RE: CPDB053 accessing QNTC subfolder -- MIDRANGE-L

http://www-01.ibm.com/support/docview.wss?uid=nas15197341657f9f57e86257655005736ff

-Eric

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of DeLong, Eric
Sent: Tuesday, October 16, 2012 10:26 AM
To: Midrange Systems Technical Discussion
Subject: RE: CPDB053 accessing QNTC subfolder

Since you're swapping with *NOPWD, I wonder if anyone can confirm that the PASSWORDS on the two accounts are identical. I've also seen cases where the NTLM hash needs to be fixed on a profile by secadmin using CHGUSRPRF PASSWORD() to force an update to the authentication hash(s) stored with the profile... There were some PTF's to enable minimal support of NTLMv2 hash, I think, but I get really confused by the whole CIFS/NTLMv2 conflict anyway... Perhaps someone else can elaborate on this...

-Eric DeLong

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Versfelt, Charles
Sent: Tuesday, October 16, 2012 9:41 AM
To: midrange-l@xxxxxxxxxxxx
Subject: Re: CPDB053 accessing QNTC subfolder

Sorry, I should have mentioned... class 1, error code 5.

I'm running under the same user profiles on both systems, which should have the same authorities.
I call under the same profiles, and then, before accessing QNTC the program "swaps" to a user profile (SWAPUSRPRF password *NOPWD) that was specifically set up on both systems to access QNTC.

Charlie

Message ID . . . . . . : CPDB053
Date sent . . . . . . : 10/16/12 Time sent . . . . . . : 15:34:48

Message . . . . : Error exchanging security information for user QNTCUSER on
Network Server ARTAPP.

Cause . . . . . : The Network Server file system (QNTC) has encountered an
error when authenticating user QNTCUSER with a Network Server ARTAPP.
Recovery . . . : Ensure the following:
- The user is set up on Network Server ARTAPP.
- The OS/400 user password matches the Network Server user password.
- Network Server ARTAPP is enabled for digitally signed communications.
Technical description . . . . . . . . : An error has been detected while the
Network Server file system was exchanging security information with a
Network Server. The error class was 1, and the error code was 5.
Possible error class and error code values include:

Message ID . . . . . . : CPDB053
Date sent . . . . . . : 10/16/12 Time sent . . . . . . : 15:34:48

Class 0 - QNTC specifc security error.
1 - QNTC requires digital signing.
Class 1 - Network Server operating system related error.
1 - Not valid Function.
2 - File not found.
3 - Directory not valid.
4 - Too many files open.
5 - Access denied.
Class 2 - Error generated by the Network Server.
1 - Non-specific error code.
2 - Bad password.
3 - Directory not valid.
4 - Access denied.

RE: CPDB053 accessing QNTC subfolder

Charlie,
Is your program running with the same/appropriate authority on both systems?
Also, you did not say what the error class and code are . . .

This email message has been delivered safely and archived online by Mimecast. For more information please visit http://www.mimecast.com