Larry,

Regarding the FUD of the 90 days (and pretty much most things System
i-related), if I'm going to trust anyone, it's going to be you. I heard
from our BP that the 90 days was actually "new" not "old" practice.

I was given a 150 at V3 that had (best guess) been sitting for over a year.
No trouble bringing it up.

Jerry C. Adams
IBM i Programmer/Analyst
Anyone who sees and paints a sky green and pastures blue ought to be
sterilized. - Adolf Hitler
--
A&K Wholesale
Murfreesboro, TN
615-867-5070


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of DrFranken
Sent: Thursday, June 09, 2011 12:29 PM
To: midrange-l@xxxxxxxxxxxx
Subject: Re: Long term storage of iSeries

As the discussion has progressed I understand that you do need to
physically keep the system. I would expect that for a while you'll be
accessing the data more frequently and keeping the thing running during
that phase makes sense. Once your frequency of access falls to less than
once per month then I think it makes sense to power it down.

For long term storage a few things:

1) Your power down needs to absolutely be a normal power down. Better
yet go to restricted condition for a half and hour then do power down.
Best possible chance that RAID caches are flushed.

2) Replace the button battery on the FSP card. It's about $4 and that
will help keep the FSP settings.

3) Be sure that the unit is stored in a location where it won't be
overheated (unlikely) or more importantly won't ever get cold enough to
condense. In your computer room obviously is a great location if it can
stay there.

4) IF it can be plugged in that's better too as it will hold the
settings on the FSP that way (the FSP stays running that way)..

5) The '90 day' or whatever timeout requiring IBM's help is FUD. There
may have been that 'a long time ago' but as an example I fired up a 170
with V4R4 that had sit for a minimum of 3 years since it last saw power.
It's battery was dead and it had no idea on data or time but it came
right up.

6) It has been mentioned to have multiple SAVE 21's from the system.
DUH. :-)

- Larry "DrFranken" Bolhuis


On 6/9/2011 4:48 AM, Terry, Guy wrote:
We no longer use our iSeries (model 520), but have to keep it until at
least 2018 (for legal reasons to do with the data).

Our maintenance will expire this year, and will not be renewed. What is
the best way to 'store' the iSeries so that it has the best chance of being
operational should we ever need to access the data on it in, say, 7 years
time?

Leave it switched on 24 x 7 (not my preferred solution).
Leave it switched off until we need it.
Leave it switched off, but power it on once in a while (how often?).

Thanks for any advice you can give. If anyone has links to IBM advice that
I can show to the boss that would be even better.

________________________________
Britax Excelsior Limited
Registered in England and Wales number: 294545
Registered Office: 3000 Hillswood Drive, Hillswood Business Park,
Chertsey, Surrey, KT16 0RS

<Disclaimer>
This message is intended for the persons named only. It may contain
private and confidential information. If this has come to you in error you
must take no action based on it, nor must you copy or show it to anyone.
Please delete this item from your computer.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2019 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].