Re: Problem with starting HTTP server

[Vern Hamberg <vhamberg@xxxxxxxxxxx>]

Hi Panayiotis

The message ID TP8206 - that is not a valid message ID - and if I assume 
it should be HTP8206.

OK, have you tried to prompt the CHGHTTPA command? If you have enough 
authority, it will display the current values - what is the CCSID value 
there? On our system, that value is 819.

HTH
Vern

On 6/2/2011 2:02 AM, Panayiotis Petrou [3813] wrote:
> I am running the following command
>
> STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
>
> And the following messages appear in the job log. As far as I know CCSID 819 is ASCII so I am not sure why it displays reason code 5 (05 -- The CCSID value specified on the CHGHTTPA command is not a valid ASCII CCSID).
>
> Below are some relevant system values. Has anybody encountered similar problems with starting the HTTP server (*ADMIN)
>
> System values are
>
> System value . . . . . :   QCCSID
>   Description  . . . . . :   Coded character set identifier
>
>
>   Coded character set
>     identifier . . . . . :   4971       1-65535
>
>
> System value . . . . . :   QCHRID
> Description  . . . . . :   Graphic character set and code page
>
>
> Character ID . . . . . :   1371           1-32767
> Code page  . . . . . . :   875            1-32767
>
>
>
> NONE      Request                      02/06/11  09:52:50.929244  QWTSCSBJ                 *N       QCMD        QSYS        0195
>                                      From user . . . . . . . . . :   D813
>                                      Message . . . . :  -CALL PGM(QHTTPSVR/QZHBMAIN) PARM('-S' 'ADMIN'
>                                        '-AdmDftPort' '2001' '-AdmDftSecPort' '2010' '-uiMin' '10' '-uiMax' '40'
>                                        '-cEAMap' '*CCSID' '-cAEMap' '*CCSID' '-uiCCSID' '819' '-apache' '-d'
>                                        '/QIBM/UserData/HTTPA/admin' '-f'
>                                        '/QIBM/ProdData/HTTPA/admin/conf/admin-ibm.conf' '-AutoStartY' '-c' 'Listen'
>                                        '2001')
> TP8206    Diagnostic              30   02/06/11  09:52:51.472495  QZSRAPR      QHTTPSVR    *STMT    QZSRCORE    QHTTPSVR    *STMT
>                                      From module . . . . . . . . :   QZSRSNDM
>                                      From procedure  . . . . . . :   sendMessageToJobLog_CCSID
>                                      Statement . . . . . . . . . :   27
>                                      To module . . . . . . . . . :   QZSRCCVL
>                                      To procedure  . . . . . . . :   validateAsciiCcsid
>                                      Statement . . . . . . . . . :   5
>                                      Message . . . . :   CCSID value is not correct.
>                                      Cause . . . . . :   CCSID value 0 is not correct.  The reason code is 5.
>                                        Reason codes and their meanings follow: 01 -- The -netccsid startup value
>                                         did not specify a valid ASCII CCSID. 02 -- The -fsccsid startup value did
>                                         not specify a valid EBCDIC CCSID. 03 -- The DefaultNetCCSID directive did
>                                         not specify a valid ASCII CCSID. 04 -- The DefaultFsCCSID directive did not
>                                         specify a valid EBCDIC CCSID. 05 -- The CCSID value specified on the
>                                         CHGHTTPA command is not a valid ASCII CCSID. 08 -- The CGIJobCCSID directive
>                                         did not specify a valid EBCDIC CCSID. Recovery  . . . :   Correct the CCSID
>                                         value and start the HTTP server again.
> HTP8003    Escape                  40   02/06/11  09:52:51.572761  QZSRAPR      QHTTPSVR    *STMT    QZHBMAIN    QHTTPSVR    *STMT
>                                       From module . . . . . . . . :   QZSRSNDM
>                                       From procedure  . . . . . . :   sendEscapeWithMessageFile
>                                       Statement . . . . . . . . . :   4
>                                       To module . . . . . . . . . :   ZHBMAIN
>                                       To procedure  . . . . . . . :   BigSwitch__FiPPc
>                                       Statement . . . . . . . . . :   338
>                                       Message . . . . :   HTTP Server Instance ADMIN failed.
>                                       Cause . . . . . :   HTTP Server instance ADMIN failed.  For more information,
>                                         see the previous messages in the job log. Recovery  . . . :   Correct the
>                                         problem identified in the job log and try the request again.
> Panayiotis (Pete) Petrou
> zVSE and Websphere MQ System Administration
> Information Technology Division
> Bank Of Cyprus
> Tel 357-22-12-8473
> panayiotis.petrou@xxxxxxxxxxxxxxxxxxxx