Re: System upgrade problem

[DrFranken <midrange@xxxxxxxxxxxx>]

 I obviously cannot say for certain but this 'smells like' a procedural 
problem during the upgrade.  Potentially some things were done out of 
order or not completed or possibly something not installed.

Run CHKPRDOPT *OPSYS and view the results. You WANT message CPC0C20 - No 
Errors.

GO LICPGM and take option 10 and review for any products that are 
highlighted as in error (perhaps 5761TC1 for example also QGPL and 
QUSRSYS flagged as *BACKLEVEL) Also verify that 5761TC1 is V6R1M0 level.

Check your PTF stati (DSPPTF and review that) as well as WRKPTFGRP to 
see if there are groups 'Not INstalled'

You should NOT need to copy commands into QSYS.

DSPCMD FTP should look this:
---------
Command  . . . . :   FTP           Library  . . . :   QSYS

Target command . . . . . . . . . . . :   FTP
  Library  . . . . . . . . . . . . . :     QTCP
Text . . . . . . . . . . . . . . . . :   Start TCP/IP File Transfer

Current proxy chain  . . . . . . . . :   QSYS/FTP
                                         QTCP/FTP
---------
QSH like this:
---------
Command  . . . . :   QSH           Library  . . . . :   QSYS

Target command . . . . . . . . . . . :   QSH
  Library  . . . . . . . . . . . . . :     QSHELL
Text . . . . . . . . . . . . . . . . :   Start QSH

Current proxy chain  . . . . . . . . :   QSYS/QSH
                                         QSHELL/QSH
---------

Larry "DrFranken" Bolhuis

On 8/23/2010 5:32 PM, WILLIAM SWANN wrote:
> Hello everyone,
>
>
>
> We just did a system upgrade over the weekend with the assistance of our business partner.  We from a 520 on power 5 to a power 6 8203 EA4.  After everything was install and restore to the new box.  We found that some commands were missing from QSYS, for example the FTP, QSH, CPYTOPCD.  We had to duplicate them from there product libraries into QSYS.  Does anyone know why this need to be done.
>
>
>
>
>
> Thank you,
>
>
> Bill Swann