This link shows a number of views of the IBM 1130 that came from Austria. WAY
larger than a 9404.

http://www.dvq.com/1130/1130.htm

John McKee

Quoting Keith Carpenter <entropypool@xxxxxxxxx>:

John McKee wrote:
Those thoughts came to me. Sheer ago of the system components,
particularly the
power supply, would make it unlikely it would work. I wasn't sure when the
system password "feature" was included in the platform. Due to the
shape and
weight, probably would not be an effective boat anchor, either.

Yes, the electrolytic capacitors will dry out over time, but they should
reform with a little conditioning. It might be safer to fire up the PSU
by itself and check it out before exposing the other components.

The system password may have been there since the beginning, but it was
not enforced until around V2R2 or V2R3. You can load the earlier
releases on an expired system.

The next problem is tape. I'm finding my old tapes are unreadable. If
your lucky enough to get the old system running, I'd do a fresh system
backup (cleaned drive, new tapes).

A more practical use for a 9404 would be to gut it and use the cabinet
for something else. Larry made a nice S/34 workbench and there was
rumor of a S/34 keg cooler years ago.
http://frankeni.com/gallery-ldbs34.html



A couple of years ago, an IBM 1130 (1967 - 1972) was on eBay - Europe.
It was
originally in Austria, but was purchased and delievered by ship to Anaheim,
California. I met the owner a couple of years ago. I can't >begin< to
imagine
how hard it might be to get it working. The CPU is the size of an
office desk. I can't recall how much he had to pay for "shipping". On
his website, he showed
pictures of uncrating it. One weird picture had a lamp laying on top.
No tape.
Surely had to have had something sticky holding it in place. As I
recall, he
was more than a little curious as to how the crate was constructed, as some
nails appeared to have been driven from inside the crate.

He paid upwards of 7000 for it. When new, 40+ years ago, it listed for
40,000
dollars.

That 9204 has one advantage over the IBM 1130: doesn't take up as much
floor
space. And, I have fond memories of the IBM 1130.


I'm partial to the Sperry Univac 90/30 and would like to have just the
control panel. Panels from a System/3, 360, & 370 would make a nice
collection.


Keith
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.






This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2019 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].