RE: LAN Configuration - Questions and an issue

["Pete Massiello" <pmassiello-ml@xxxxxxxxxxxx>]

Pete,
	From what you have below, CMN19 is definitely the T5 port on the
back of the CEC.

	You can try going into SST by typing STRSST, then option 8 for work
with Service tools userids and Devices , then  select option 3.  If it's a
Twinax console, it should have Console type set to #1 Twinax.  Also option 4
on the Configure Service tools Lan Adapter should have the TOP area blank.

Pete

	Resource name  . . . . . . . :   CMN19
Text . . . . . . . . . . . . :   Ethernet Port
Type-model . . . . . . . . . :   5706-001
Serial number  . . . . . . . :   00-53967EA
Part number  . . . . . . . . :   39J4251

Location:   U787F.001.DPM09V2-P1-T5

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Pete Helgren
Sent: Friday, February 29, 2008 1:52 PM
To: Midrange Systems Technical Discussion
Subject: Re: LAN Configuration - Questions and an issue

No.  This is a twinax shop so the console is supposed to be Twinax.  
Could it have been configured for LAN concole in SST?  Should I look for 
something that would indicate it is configured for LAN console even 
though we are using Twinax?

Pete

Pete Massiello wrote:
> I bet you are using LAN Console, and that is what is using the port.
>
> 	Pete Massiello
>
>
>