× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



There is defaults for both HMC1 and HMC2 ports on the back of the i5. They
default to 192.168.2.147 and 192.168.3.147, but that is when you have a
stand alone box.

Pete

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Chris Bipes
Sent: Friday, December 14, 2007 10:16 AM
To: Midrange Systems Technical Discussion
Subject: RE: DCR for HMC setup

I rather have them fix the issue with the FSP. Just assign a default IP
address for each port and be done with it. Then once you have the HMC
working, it can check these default IP address and find the FSP and life
would be good again.


Chris Bipes
Director of I.S.
CrossCheck, Inc.

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Friday, December 14, 2007 6:34 AM
To: midrange-l@xxxxxxxxxxxx
Subject: DCR for HMC setup

So, what do you think about submitting a DCR that IBM slaps a little
placard over the power plug holes on the iSeries that says something to
the effect of:

"NOTE! If you are controlling this system with an HMC do NOT plug this
machine in until you have finished setting up the HMC, and installed the
necessary network cabling from here to the HMC! See setup instructions
for further details."


As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.