In order to help with our backups, we are ordering a NAS device ,a Buffalo
TeraStation Pro II with 4 TB of raw disk space.

I'd like to know if this could be attached to out System i in some way to
use instead of our dinsoaur tapes... I know next to nothing about this kind
of device but the specs from their web site are below.

LAN Interface Standard Compliance IEEE802.3ab / IEEE802.3u /
IEEE802.3Standard (1000BASE-T / 100BASE-TX / 10BASE-T) Data
Transfer Rates 10 / 100 / 1000 Mbps Connector Type RJ-45 Number of
Ports 1 Internal
Hard Drives Number of Drives 4 Drive Interface SATA Hard Drive Sizes 250GB,
500GB, 750GB Total Capacity 1.0 TB, 2.0 TB Rotational Speed 7200 RPM
Supported
RAID Levels 0, 1, 5, 10, JBOD Interface Standard Compliance USB 2.0
Connector
Type USB Series A Number of Ports 2 Data Transfer Rates Max: 480 Mbps
(High Speed Mode)
Max: 12 Mbps (Full Speed Mode) Protocol Support Networking TCP/IP File
Sharing SMB, FTP Directory Integration Active Directory Management HTTP,
DFS Time Syncronization NTP Others Dimensions (WxHxD in.) 6.69 x 12.2 x
9.25 Weight (lbs) 16.1 Power Consumption (Watts) 60 Operating Environment
(Fahrenheit) 32-95° Setup Utility OS Support Windows Operating Systems Client
OS Support Windows(R) XP, Windows(R) 2000, Windows(R) Me, Windows(R) NT 4.0,
Windows(R) 98 SE, Linux (SMB) Power Supply internal, AC100V 50/60 Hz

This thread ...

Follow-Ups:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2019 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].