Re: Image Catalogue Question

[Jerry Adams <jerry@xxxxxxxxxxxxxxx>]

I recall seeing that once in the Cume instructions.  It has been so long 
ago (or maybe it's the gray hair, which is simply the gray cells 
escaping) that I don't recall the steps.  That is, I do remember that I 
was using CD's at the time, but I don't recall if I had to install a 
specific PTF, re-IPL, and then apply the entire Cume, or if the install 
process did that automagically with me just IPLing a second time.  I do 
recall that there were special instructions in the Cume's cover letter; 
there are no such instructions in this Cume's instructions.


All of which seems rather academic today.  The cover letter is for Level 
7107, which I already have installed.  Obviously should have checked the 
Tech Support Bulletin's links before starting the download.  Duh...  
Guess I'll move on to the Groups.


But it's still worth knowing for future reference the correct sequence 
and procedure.  Chad's process was the one that I used with the last 
Cume and some individual PTF's, but I like Rob's suggestion of loading 
all with a delay PTF as it seems like it would save a little time.

Thanks.

	* Jerry C. Adams
*IBM System i Programmer/Analyst
B&W Wholesale Distributors, Inc.* *
voice
	615.995.7024
fax
	615.995.1201
email
	jerry@xxxxxxxxxxxxxxx <mailto:jerry@xxxxxxxxxxxxxxx>



Paul Nelson wrote:
> It's been a while, but I've seen a couple of PTF cycles where specific PTF's
> are required to installed with an IPL before moving forward.
>
> No biggie.
>
> Paul Nelson
> Cell 708-670-6978
> Office 512-392-2577
> nelsonp@xxxxxxxxxxxxx
>
>
> -----Original Message-----
> From: midrange-l-bounces@xxxxxxxxxxxx
> [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
> Sent: Tuesday, August 14, 2007 7:41 AM
> To: Midrange Systems Technical Discussion
> Subject: RE: Image Catalogue Question
>
> Paul,
>
> I always (except during an OS upgrade)
> load the cume with INSPTF LICPGM((*ALL)) DEV(OPTVRT01) INSTYP(*DLYALL)
> load the groups with INSPTF LICPGM((*ALL)) DEV(OPTVRT01) INSTYP(*DLYALL)
> load the misc ones with INSPTF LICPGM((*ALL)) DEV(OPTVRT01) 
> INSTYP(*DLYALL)
> after the various LODIMGCLG's.  All during the week.  And then IPL during 
> the weekend.  Don't recall ever running into the issue you mention.
>
> Rob Berendt
>