Always, Never, Sometimes, Usually...
IT DEPENDS!
The only always is: "Always read the instructions!"
Regards,
Scott Ingvaldson
System i Administrator
GuideOne Mutual Insurance Company
-----Original Message-----
From: rob@xxxxxxxxx [mailto:rob@xxxxxxxxx]
Sent: Tuesday, August 14, 2007 7:41 AM
To: Midrange Systems Technical Discussion
Subject: RE: Image Catalogue Question
Paul,
I always (except during an OS upgrade)
load the cume with INSPTF LICPGM((*ALL)) DEV(OPTVRT01) INSTYP(*DLYALL)
load the groups with INSPTF LICPGM((*ALL)) DEV(OPTVRT01) INSTYP(*DLYALL)
load the misc ones with INSPTF LICPGM((*ALL)) DEV(OPTVRT01)
INSTYP(*DLYALL)
after the various LODIMGCLG's. All during the week. And then IPL
during the weekend. Don't recall ever running into the issue you
mention.
Rob Berendt
--
Group Dekko Services, LLC
Dept 01.073
PO Box 2000
Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com
"Paul Nelson" <nelsonp@xxxxxxxxxxxxx>
Sent by: midrange-l-bounces@xxxxxxxxxxxx
08/14/2007 07:56 AM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
To
"'Midrange Systems Technical Discussion'" <midrange-l@xxxxxxxxxxxx>
cc
Fax to
Subject
RE: Image Catalogue Question
That's all well and good, but how about those instances where you have a
pre-req that requires an IPL before moving forward? I always use 2 image
catalogs.
Paul Nelson
Cell 708-670-6978
Office 512-392-2577
nelsonp@xxxxxxxxxxxxx
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
ChadB@xxxxxxxxxxxxxxxxxxxx
Sent: Tuesday, August 14, 2007 6:40 AM
To: Midrange Systems Technical Discussion
Subject: Re: Image Catalogue Question
I had the same question the first time!
When I did my cume and groups from ICs, I loaded the cume, the DB group,
and the Hiper group all to one image catalog. (loaded the discs to the
catalog with cume first, then the other 2 groups)
Then when loading the PTF group within option 8, choose the option for a
single PTF volume set (option 1 i'm pretty sure).
Jerry Adams
<jerry@bwwholesal
e.com>
To
Sent by: Midrange-L
midrange-l-bounce <midrange-l@xxxxxxxxxxxx>
s@xxxxxxxxxxxx
cc
Subject
08/14/2007 07:36 Image Catalogue Question
AM
Please respond to
Midrange Systems
Technical
Discussion
<midrange-l@midra
nge.com>
Can I download a Cume and Group PTF's to the same image catalogue for
later install in a single pass?
Well, I guess that's not really the way to word the question. Obviously
multiple PTF's (Groups or Individuals) can be downloaded to a single
image catalogue. I guess the real question is, on the "Install Options
for PTFs" panel, what option would need to be entered in the 'Prompt for
media' option to get all PTF's installed in a single pass?
I've used IC's for upgrades, Cume's, Groups, and Individuals, but never
in combination. Sorry if this is an obvious thing.
--
* Jerry C. Adams
*IBM System i Programmer/Analyst
B&W Wholesale Distributors, Inc.* *
voice
615.995.7024
fax
615.995.1201
email
jerry@xxxxxxxxxxxxxxx <mailto:jerry@xxxxxxxxxxxxxxx>
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at
http://archive.midrange.com/midrange-l.
midrange.com
