×
The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.
BFH :-)
Thanx,
Nick
Nick Radich
Sr. Programmer/Analyst
EPC Molding, Inc.
Direct (320) 679-6683
Toll free (800) 388-2155 ext. 6683
Fax (320) 679-4516
nick_radich@xxxxxxxxxxxxxx
"Holden Tommy" <Tommy.Holden@xxxxxxxxxxxxxxxxx>
Sent by: midrange-l-bounces@xxxxxxxxxxxx
06/15/07 02:59 PM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
To
"Midrange Systems Technical Discussion" <midrange-l@xxxxxxxxxxxx>
cc
Subject
RE: Model 200 - One More Time
Hammer and crowbar works well 8^)
Thanks,
Tommy Holden
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[
mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Matt Gross
Sent: Friday, June 15, 2007 2:56 PM
To: Post AS-400 System Questions
Subject: Model 200 - One More Time
The box is toast, but I'll try one more thing. Does anyone know how I
can open it up to get at the drive(s), power supply, etc.
Thanks,
Matt
PS - this system doesn't run any company. This was a giveaway I
sometimes use if a small project comes up.
midrange.com
