RE: Printing confusion

Below is what option 8 shows. Also, the actual DDS does go out to at
least 94 bytes wide.

Page size:
Length . . . . . . . . . . . . . . . : 51
Width . . . . . . . . . . . . . . . : 132
Measurement method . . . . . . . . . : *ROWCOL
Lines per inch . . . . . . . . . . . . : 6
Characters per inch . . . . . . . . . : 10
Overflow line number . . . . . . . . . : 42
Fold records . . . . . . . . . . . . . : *NO

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
kirkg@xxxxxxxxxxxxx
Sent: Friday, May 11, 2007 9:10 AM
To: Midrange Systems Technical Discussion
Subject: Re: Printing confusion

Here's a quick guess... Look at the PRTF or use OPT #8 while the job is
in the outq. Look for the Page Size parms. The system 'knows' your 4224
is a wide carriage printer, and that the HP is a laser (read narrow
carriage id you will). I general terms, if the Page Width is over 80
characters, then the system forces a function called COR (computer
something reduction). This does 2 things typically, rotates the page to
landscape and goes to a small a font.

The maybe just changing the printfile from it's default of 132 wide to
80 wide 'may' fix the problem. There are other ways to fix it if that
doesn't do it.

--
Kirk Goins
Systems Engineer, Manage Inc.
IBM Certified in i5 Solution Sales,
i5 Technical Solutions Expert V5R4,
iSeries Multiple Systems Administrator V5R3, Systems Expert - i5 LPAR
Technical Solutions V5R3

Office 503-353-1721 x106 Cell 503-577-9519
kirkg@xxxxxxxxxxxxx www.manageinc.com

Email Response Times:
Same Day Maybe, Next Day Probably



"Don Cavaiani" <dcavaiani@xxxxxxxxxxxxx> Sent by:
midrange-l-bounces@xxxxxxxxxxxx
05/11/2007 06:28 AM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>


To
<midrange-l@xxxxxxxxxxxx>
cc

Subject
Printing confusion







Greetings,

I'm confused (pretty normal state). We currently print P.O.s on a 4224
printer using a custom form. Time to reorder forms, and now we would
like
to buy cut sheet form and print these P.O.'s out on an HP LaserJet
(configured via Client Access). I tested this, and for whatever reason,

when the P.O. printed out on the laser, it was greatly condensed both
horizontally and vertically?

Don

Don F. Cavaiani
IT Manager
Amerequip Corp.
920-894-7063

"Only one who devotes himself to a cause with his whole strength and
soul
can be a true master. For this reason mastery demands all of a person."
Albert Einstein