×
The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.
We did this about a year ago and I think you will find that your biggest
problems are with changing the IP address but getting everything outside
the iSeries to know about the change. DNS servers, IP address
restrictions on any other server the iSeries talks to, firewall conduits
mapped to the old address, not-so-bright PC techs who used an ip address
in a Client Access configuration instead of a name (or used a local host
table on the PC to map a name to an address).
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[
mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Larry Bolhuis
Sent: Wednesday, April 11, 2007 4:42 PM
To: Midrange Systems Technical Discussion
Subject: Re: IP Address change on iSeries
Absotively! You can add a great big bunchfull of addresses per line. In
addition you can create virtual IPs that don't live on either line but
float between them (assuming they are both in the same IP Subnet).
The easiest thing to do is simple add the new IP interface through iNav
(or CFGTCP option 1) and then start it up.
- Larry
DebbieKelemen wrote:
We have a 520. We got a card put in the other port. So we have two
addresses assigned already for some reason.
So can I add a 3rd & start adding & mapping without a problem? Can I
leave
the others without an issue?
midrange.com
