RE: Sending an Email From AS400

I have found SPOOLMAIL from Gumbo Software to be a fine and cost effective 
system.

________________________________

From: midrange-l-bounces@xxxxxxxxxxxx on behalf of Wilt, Charles
Sent: Fri 5/12/2006 12:50 PM
To: Midrange Systems Technical Discussion
Subject: RE: Sending an Email From AS400



If you want to use SNDDST, you need to:

   1. In the iSeries character-based interface, type: ADDDIRE
USRID(INTERNET GATEWAY) USRD('Allow SNDDST to send INTERNET Mail')
SYSNAME(INTERNET) MSFSRVLVL(*USRIDX) PREFADR(NETUSRID *IBM ATCONTXT)
   2. Type CHGDSTA SMTPRTE(INTERNET GATEWAY) and press Enter.

Also, every profile you want to send email needs to be in the system
distribution directory.

Note, SNDDST may be free, but I wouldn't recommend using it.  Biggest
limitation is that it can only send attachments out of the QDLS file
system.  The QDLS file system is limited and very slow, you should stay
away from it as much as possible.

I realize that you say you only need to send one email a day.  But I
guarantee that once you show you're users that you can send email,
they'll be asking for all kinds of email.

You can also expect to be asked to email out spool files very soon.  So
consider just getting a tool or tool package that can convert and send
spool files as email along with just being able to send regular email
messages.

I'd recommend:
1) Brads MAILTOOL/SPLTOOL/AFPTOOL combo
http://www.bvstools.com/spltoolsuite.html
2) Gumbo's products http://www.gumbo.com/Licpgm/Position.html
3) @riadne Products http://www.ariadnesoftware.com/



Charles Wilt
--
iSeries Systems Administrator / Developer
Mitsubishi Electric Automotive America
ph: 513-573-4343
fax: 513-398-1121
 

> -----Original Message-----
> From: midrange-l-bounces@xxxxxxxxxxxx
> [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Ryan Hunt
> Sent: Friday, May 12, 2006 11:38 AM
> To: midrange-l@xxxxxxxxxxxx
> Subject: Re: Sending an Email From AS400
>
> I can't quite find what I need.  This document seems centered
> on making the
> AS400 my SMTP/SNADS and POP server.  SMTP is running and I
> have put in the
> proper SMTP relay address in the "use mail router" field.
>
> I have tried to send a message using SNDDST with the internet
> address being
> the email address I am trying to send to but I get errors
> about the SMTPRTE
> param in the CHGDSTA command.  I checked out CHGDSTA briefly
> - but I didn't
> want to just blindly change that value.
>
> Is there any easy way to send a message using an external
> server as the
> relay?  I followed the document through the "Enroll Email
> Users" section  -
> where it appears the users were being setup to receive email,
> not just send
> to a relay.
>
> Any ideas.
>
> <rob@xxxxxxxxx> wrote in message
> news:OF82E56417.E676C829-ON8525716C.00509EEC-8525716C.0050CA40
> @dekko.com...
> > Hell no!  OV/400 was a deprecated product that died with
> V4R5 of OS/400.
> > I'd get started here
> >
> http://publib.boulder.ibm.com/infocenter/iseries/v5r4/topic/rz
> air/rzairgetstart.htm
> >
> > Rob Berendt
> > --
> > Group Dekko Services, LLC
> > Dept 01.073
> > PO Box 2000
> > Dock 108
> > 6928N 400E
> > Kendallville, IN 46755
> > http://www.dekko.com
> >
> >
> >
> >
> >
> > "Ryan Hunt" <ryan.hunt@xxxxxxxxxxxxx>
> > Sent by: midrange-l-bounces@xxxxxxxxxxxx
> > 05/12/2006 10:37 AM
> > Please respond to
> > Midrange Systems Technical Discussion
> <midrange-l@xxxxxxxxxxxx>
> >
> >
> > To
> > midrange-l@xxxxxxxxxxxx
> > cc
> >
> > Subject
> > Sending an Email From AS400
> >
> >
> >
> >
> >
> >
> > I have an automated CL process that I would like to setup
> to email one of
> > our exchange relays.  We do not currently send email from our AS400.
> >
> > Essentially, I want to be able to send a message to
> SomeGroup@xxxxxxxxxxxx
> > using a relay identified in our DNS as SMTP.SomeDomainName.com
> >
> > Is this the right document to use to get that setup?
> >
> http://www-912.ibm.com/s_dir/slkbase.NSF/0cf528a492c9b4a886256
> 80b0002037f/05065e3e8dd15454862565c2007caa52?OpenDocument
> >
> >
> > I tried to follow it but I don't think all the params of
> ADDDIRE are the
> > same in V5R2 as they were in V4R1...which makes me question the doc.
> >
> > Thanks.
> > RH
> >
> >
> >
> > --
> > This is the Midrange Systems Technical Discussion
> (MIDRANGE-L) mailing
> > list
> > To post a message email:
> MIDRANGE-L@xxxxxxxxxxxx
> > To subscribe, unsubscribe, or change list options,
> > visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> > or email: MIDRANGE-L-request@xxxxxxxxxxxx
> > Before posting, please take a moment to review the archives
> > at http://archive.midrange.com/midrange-l.
> >
> >
> > --
> > This is the Midrange Systems Technical Discussion
> (MIDRANGE-L) mailing
> list
> > To post a message email:
> MIDRANGE-L@xxxxxxxxxxxx
> > To subscribe, unsubscribe, or change list options,
> > visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> > or email: MIDRANGE-L-request@xxxxxxxxxxxx
> > Before posting, please take a moment to review the archives
> > at http://archive.midrange.com/midrange-l.
> >
> >
>
>
>
> --
> This is the Midrange Systems Technical Discussion
> (MIDRANGE-L) mailing list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>
>

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.