Re: UPS Attachment to an i5 520

[Larry Bolhuis <lbolhuis@xxxxxxxxxx>]

Before you go too crazy with the plug-unplug thing make sure that your 
QUPSDLYTIM isn't set at 0 or you'll get an immediate PWRDWNSYS when you 
pull the cable.  Make sure it's set MUCH higher than the amount of time 
you expect the cable to be unplugged!
- Larry

ChadB@xxxxxxxxxxxxxxxxxxxx wrote:
> Good luck.. sounds like it's flat out not working (instead of not being
> able to tell if it's working or not).  Maybe demand that they bring a new
> FC1827 cable with them... they shouldn't have a problem with that.  I'd
> also try to coordinate with one of the Rochester UPS feature gurus to be
> available for a phone call when the CE comes... tell 'em you're tired of
> jumping thru hoops on this one.
>
> When it's working, try unplugging/replugging the cable... it should be easy
> to tell if it's attached at that point.
>
>                                                                            
>              "Jeff Crosby"                                                 
>              <jlcrosby@dilgard                                             
>              foods.com>                                                 To 
>              Sent by:                  "'Midrange Systems Technical        
>              midrange-l-bounce         Discussion'"                        
>              s@xxxxxxxxxxxx            <midrange-l@xxxxxxxxxxxx>           
>                                                                         cc 
>                                                                            
>              02/20/2006 12:45                                      Subject 
>              PM                        RE: UPS Attachment to an i5 520     
>                                                                            
>                                                                            
>              Please respond to                                             
>              Midrange Systems                                              
>                  Technical                                                 
>                 Discussion                                                 
>              <midrange-l@midra                                             
>                  nge.com>                                                  
>                                                                            
>                                                                            
>
>
>