|
midrange.com
I'm looking back through my notes and they're very vague, but i'll list
anything I think might help:
On one of our 2 boxes we had to load some MH* PTFs and we needed to
be at a certain level of 'firmware' - at the time we were setting this up,
that was Level 75
The marker PTF I have listed was MH00150, and I think it pulled the
other necessary PTFs.
The power up message stating the cable is attached occurs only on the
first IPL after attachment
This last one spurs a more specific memory:
The initial tech we talked to said that the disconnect/reconnect
messages wouldn't register according to his documentation. We found that
not to be true, and can get those disconnect/reconnect messages each
time we've tested it. He may be referring to that same document, but in
our experience, that statement is WRONG!
My impression of the whole UPS connection setup on the 520s is that it was
very confusing, the PTFs weren't ready for a long time when the 520s came
out and we were waiting for a period before we could set this up
initially. Support at that time seemed to be more than a little confused
about all the various pieces to make it work also... hopefully that's
improved by now!
"Jeff Crosby"
<jlcrosby@dilgard
foods.com> To
Sent by: "'Midrange Systems Technical
midrange-l-bounce Discussion'"
s@xxxxxxxxxxxx <midrange-l@xxxxxxxxxxxx>
cc
02/17/2006 10:08 Subject
AM RE: UPS Attachment to an i5 520
Please respond to
Midrange Systems
Technical
Discussion
<midrange-l@midra
nge.com>
Chad/Jim,
> I'm SURE that with what sounds like an identical setup, we
> can remove/reattach the cable and the system will recognize
> that and spit out the CPI* messages pretty much instantly.
OK, try it. <g>
Also, the IPL was a *SYS, not a *FULL. Tonight I'll try a *FULL.
In addition to the initial paragraph I quoted, this document also states
that FSP reset only occurs with a complete power down and unplug for at
least 2 minutes, which you alluded to Chad, and I did with the CE at one
time.
--
Jeff Crosby
Dilgard Frozen Foods, Inc.
P.O. Box 13369
Ft. Wayne, IN 46868-3369
260-422-7531
The opinions expressed are my own and not necessarily the opinion of my
company. Unless I say so.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.
_____________________________________________________________________________
Scanned by IBM Email Security Management Services powered by MessageLabs.
For more information please visit http://www.ers.ibm.com
_____________________________________________________________________________
ForwardSourceID:NT0003C546
_____________________________________________________________________________
Scanned by IBM Email Security Management Services powered by MessageLabs. For
more information please visit http://www.ers.ibm.com
_____________________________________________________________________________
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2025 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.
