RE: HMC & Alternate console

["Chris Bipes" <chris.bipes@xxxxxxxxxxxxxxx>]

That will move it to QCTL which is where it needs to be for go save 21
stuff.  But there is already a *CONS which puts all system consoles in
to QCTL.  I had this configuration with two twinax consoles years ago.
I do not remember if an IPL was required. 


Christopher Bipes
Information Services Director
CrossCheck, Inc.

707.586.0551, ext. 1102
707.585.5700 FAX

Chris.Bipes@xxxxxxxxxxxxxxx
www.Cross-Check.com

Notice of Confidentiality: This e-mail, and any attachments thereto, is
intended only for use by the addressee(s) named herein and may contain
legally privileged and/or confidential information.  If you are not the
intended recipient of this e-mail, you are hereby notified that any
dissemination, distribution or copying of this e-mail, and any
attachments thereto, is strictly prohibited.  If you have received this
e-mail in error, please immediately notify me by e-mail (by replying to
this message) or telephone (noted above) and permanently delete the
original and any copy of any e-mail and any printout thereof.  Thank you
for your cooperation with respect to this matter.


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Bryan Dietz
Sent: Wednesday, January 25, 2006 10:27 AM
To: Midrange Systems Technical Discussion
Subject: Re: HMC & Alternate console

Not exactly sure about taking over as the console,
but to get the description allocated to the correct subsystems run the
following commands:

ADDWSE SBSD(QCTL) WRKSTN(DSP01) AT(*SIGNON)

ADDWSE SBSD(QINTER) WRKSTN(DSP01) AT(*ENTER)