Problem with SRC A9002000

I have a 9406-270 that currently has A9002000 displayed on the front
panel.  This particular AS400 has a Main Tower and an expansion tower.
I've been studying the Rack Config for this system and know that it has
two 2746 Work Station IOA cards, one in the main tower, the other in the
Expansion tower. The Load source for this system is contained on the
Combined Function IOP Card in the main tower. The system has one Twinax
brick plugged into the 2746 card in the expansion tower. (I have
visually verified this.)   The 2746 card in the main tower has nothing
plugged into it.  The work station plugged into the brick is operational
and is configured as DSP01, CTL01, Port 0, Switch 0.

 

 

Here is my question...  Is the A9002000 error caused because the system
is trying to find the console on the 2746 card in the main tower, which
has nothing connected to it?  

 

Joel B. Harvell

Food Lion, LLC

(704) 633-8250 x2709

jbharvell@xxxxxxxxxxxx

 


**************************************************************************
This electronic message may contain confidential or privileged information
and is intended for the individual or entity named above.  If you are 
not the intended recipient, be aware that any disclosure, copying, 
distribution or use of the contents of this information is prohibited. 
If you have received this electronic transmission in error, please notify 
the sender immediately by using the e-mail address or by telephone
(704-633-8250).
**************************************************************************