RE: Problems with AS/400 250

["Chuck Lewis" <clewis@xxxxxxxxxx>]

In that case, can I just tell it to use that drive OR stick another one in
there (I have some from a 620) ?

Thanks !

Chuck

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Keith Carpenter
Sent: Thursday, May 19, 2005 2:11 PM
To: Midrange Systems Technical Discussion
Subject: Re: Problems with AS/400 250


You should get a hardware SRC if any harddisk failed.

You might check the serial#s of the disks currently installed in the 
system.  If none match your error, it's possible that the original load 
source was removed.


Keith


Chuck Lewis wrote:
> Hi Folks,
> 
>  
> 
> Guiding some folks through a reload from scratch of a 250 that had been
> sitting idle for a couple of years. This is the same one I posted on
awhile
> back; turns out it was scratched I guess.
> 
>  
> 
> So the restore was started via the IPL to tape and their first save tape
> (from Save 21).
> 
>  
> 
> And after awhile a screen is displayed with:
> 
>  
> 
> Install Licensed Code - Error
> 
>  
> 
> Error:
> 
>  
> 
> The load source disk could not be found (see disk information below.)
> 
>  
> 
> Missing load source disk:
> 
>  
> 
> Serial Number    Type     Model   I/O Bus Controller
> 
> 33-0C88590       6717     050       0            1
> 
>  
> 
> A disk could not be selected to the load source.
> 
> You can return to the Dedicated Service Tools display and 
> 
> run diagnostics  to determine why a disk could not be 
> 
> selected.
> 
>  
> 
> Correct the problem and install  the Licensed Internal Code
> 
> Again.
> 
>  
> 
> So is this a "stiction" (sp) problem since it sat for so long ?
> 
>  
> 
> Thanks !
> 
>  
> 
> Chuck
> 
-- 
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.