× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Ah, yes - this way will work too - I was going for the most intrusive
and annoying method.  As a side note, I think this leaves an SRC on the
control panel until the next time you IPL.  No biggie, doesn't affect
anything negatively, just be prepared for it.

Also - that would be a good time to create yourself a profile in the SST
user profile list with a known password that has user edit authorities -
that way you can edit passwords and re-enable even easier if it happens
again.

Justin 

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jim Hawkins
Sent: Monday, May 02, 2005 1:30 PM
To: midrange-l@xxxxxxxxxxxx
Subject: RE: DST/SST woes

Here are some notes I have on the subject from running into this issue
and contacting IBM. (note: we have an 820 on v5r2--your milage may
differ) HTH.

Signed on as QSECOFR
type CHGDSTPWD  F4
change the value of the parm to *default


- Make sure that Key stick is in (if any).
- On front Panel you should have toggle buttons and in the middle an
enter button.
- Toggle Up to 02.
-  Press enter.
-  Press enter again to skip B
- Toggle up or down to change N to M
-  Press enter ( that will take you back to 02)
-  Change 02 to 21
-  Press enter
 - It will change to 2100
-  On your console you should see DST sign on screen.
- Sign on with ID QSECOFR password QSECOFR ( upper case)
- after pressing enter it will force you to change it.
- new password mu be between 6-8 characters long.
- it can not be the last 18 passwords that were used.

once done, Put system back into normal mode by changing M to N.

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++
 Jim Hawkins

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at http://archive.midrange.com/midrange-l.



CONFIDENTIALITY NOTICE:  This e-mail communication, including attachments, is 
covered by the Electronic Communications Privacy Act, 18 U.S.C. 2510-2521, is 
confidential, and may be legally privileged.  If you are not the intended 
recipient or believe you received this communication in error, please reply to 
the sender indicating that fact and delete the copy you received.  In addition, 
retention, dissemination, distribution, copying, or otherwise use of the 
information contained in this communication is strictly prohibited.  Thank you.


As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.