Re: No signon screen

[MWalter@xxxxxxxxxxxxxxx]

Are you trying to bring the terminal up as the console? If the device is
not named the same as the QCONSOLE system value, I don't think it'll come
up. Is QINTER started? If it comes up when QINTER is started, then you may
have to look at the device name for that controller/port/address. Also, are
there two twinax controllers? Doesn't the console have to be port 0,
address 0, on the first controller? It's been a long time.

Thanks,

Mark

Mark D. Walter
Senior Programmer/Analyst
CCX, Inc.
mwalter@xxxxxxxxxx
http://www.ccxinc.com


                                                                           
             Pete Helgren                                                  
             <Pete@xxxxxxxxxx>                                             
             Sent by:                                                   To 
             midrange-l-bounce         Midrange Systems Technical          
             s@xxxxxxxxxxxx            Discussion                          
                                       <midrange-l@xxxxxxxxxxxx>           
                                                                        cc 
             04/19/2005 10:47                                              
             AM                                                    Subject 
                                       Re: No signon screen                
                                                                           
             Please respond to                                             
             Midrange Systems                                              
                 Technical                                                 
                Discussion                                                 
             <midrange-l@midra                                             
                 nge.com>                                                  
                                                                           
                                                                           




The same address as what?  Autoconfig is ON, BTW.

Pete


michael@xxxxxxxxxxxxxxxxxx wrote:

>Does the terminal have the same address?
>
>
>
>>-------- Original Message --------
>>Subject: No signon screen
>>From: Pete Helgren <Pete@xxxxxxxxxx>
>>Date: Tue, April 19, 2005 10:30 am
>>To: Midrange Mailing List <MIDRANGE-L@xxxxxxxxxxxx>
>>
>>I have a model 720, V5R2M0 that I am about to scratch and reinstall the
>>OS on (as soon as I figure out how to do that), but I am a little
>>concerned that I don't currently get a signon screen on a 3476 terminal
>>that is attached.  I get the cursor moving from the right to left.  A
>>device description is created, the status goes to Varied ON, and the
>>controller becomes active, but I never get a signon screen.  Before I
>>torch this thing I want to make sure I'll get a console and a signon.
>>
>>I tried different terminals (I have three) and a couple of different
>>cables, but still no luck.
>>
>>This is a hand-me-down machine but I know that the controller and
>>terminal worked.
>>
>>Currently I access the machine using telnet but that won't work once I
>>scratch install .
>>
>>The Twinax controller is CTL02. Cable is in Port 0. Address on the
>>terminal is 0.  No messages are sent to Qsysopr....what am I missing?
>>
>>Pete Helgren
>>--
>>This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
>>To post a message email: MIDRANGE-L@xxxxxxxxxxxx
>>To subscribe, unsubscribe, or change list options,
>>visit: http://lists.midrange.com/mailman/listinfo/midrange-l
>>or email: MIDRANGE-L-request@xxxxxxxxxxxx
>>Before posting, please take a moment to review the archives
>>at http://archive.midrange.com/midrange-l.
>>
>>
>
>
>
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.