× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



I was working from the console, our console is connected via twinax and with 
a normal IPL it loads fine, and we can log in from the console with no 
problem, perform normal everyday routines, it is only when attempting a BM 
that it fails.

The console is connected and powered on


On Thu, 31 Mar 2005 19:40:51 -0800, Keith Carpenter wrote
> The whole point of a manual IPL is to use the console to do system 
> maintenance functions like upgrade the OS, apply PTFs, or run DST 
> (dedicated mode service tools).
> 
> A Normal IPL will start the OS with or without a console.  Hence no 
> need to generate an error if the console is not connected or powered 
> off.
> 
> Do you have a console ?
> Is it connected and powered on ?
> 
> I'm guessing you've not used a console before.
> Your system (170) is configured to use either a twinax or ascii type 
> of console.  The type is is determined by the which cards are 
> installed and the slots they are in.  There will be a special serial 
> cable for the ascii console.  Twinax (looks like a large 2 pin coax) 
> uses a dedicated 5250 terminal.
> 
> Your system (probably recently purchased), should have come with 
> some cables for either twinax or an ascii console.
> 
> Keith
> 
> D.W. wrote:
> > I am trying to do a manual IPL and I am getting an error message
> > A6005008.  I did a look up on google and it appears that its complaining
> > about not finding the console, but when I do a normal IPL it loads with
> > no problems.
> >  
> > Suggestions? Ideas? I need to fix a system password issue and I am down
> > to about five days, and this is really starting to get irritating.
> >  
> -- 
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) 
> mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To 
> subscribe, unsubscribe, or change list options, visit: 
> http://lists.midrange.com/mailman/listinfo/midrange-l or email: 
> MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment 
> to review the archives at http://archive.midrange.com/midrange-l.


--
Open WebMail Project (http://openwebmail.org)


As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.